HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

*****: The values are encoded by the CLI.
GetArrayReservation
GetArrayReservation obtains information about a locked storage system. This command does
not have parameters.
Command execution example
hdvmcli GetArrayReservation -o "D:\logs\GetArrayReservation.log"
Command execution result
An instance of ArrayReservation
objectID=*****
target=*****
serialNumber=14009
arrayType=XP12000
loginID=dmuser
beginTime=1,039,003,476
*****: The values are encoded by the CLI.
GetPoolShrinkStatus
The GetPoolShrinkStatus command obtains the execution status of the THP/Smart-pool shrinking
operation that was executed by the ShrinkPool command.
If you execute this command, the information of the THP/Smart pool volumes that belong to the
THP/Smart pool is displayed.
After the operation for shrinking the THP/Smart pool finishes, the excluded THP/Smart pool volumes
change to normal volumes and will not appear in the execution result of this command.
When all of the THP/Smart pool volumes change to normal volumes that belong to the THP/Smart
pool specified by the ShrinkPool command (when no corresponding LogicalUnit instances are
displayed), use the FormatLU command to format the volumes.
NOTE:
• This command can be used only with P9500.
• While the THP/Smart-pool shrinking operation is being executed, if another operation is performed
on the pool and the pool changes to a status in which the pool cannot shrink, the THP/Smart-pool
shrinking operation fails. As a result, the THP/Smart pool volumes to be excluded might partially
remain as they are, without being excluded. In this case, do not execute the FormatLU command
for these volumes.
• The storage system is locked while this command is being executed. For this reason, do not execute
this command repeatedly.
CLI Reference Guide 113