HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 CLI Reference Guide

DescriptionStatusParameter name
Instance number of the HORCM instance for managing the P-VOL
When using Method 1, specify the instance number of the P-VOL
of a group specified in the definition file.
You must specify this parameter when you are using method 1
or 2.
Optional
pvolinstan-
cenum
Port number of the HORCM instance for managing the P-VOL
Depending on the host OS, specify the appropriate value:
• In Solaris, specify an integer from 0 to 65535.
• In AIX, Windows, HP-UX, and Linux, specify an integer from
1 to 65535.
You must specify this parameter when you are using method 3.
Optional
pvolportnum
Host ID for identifying the S-VOL
When using Method 1, specify the host ID of the S-VOL of a group
specified in the definition file.
Required
svolhostid
Instance number of the HORCM instance for managing the S-VOL
When using Method 1, specify the instance number of the S-VOL
of a group specified in the definition file.
You must specify this parameter when you are using method 1
or 2.
Optional
svolinstan-
cenum
Port number of the HORCM instance for managing the S-VOL
Depending on the host OS, specify the appropriate value:
• In Solaris, specify an integer from 0 to 65535.
• In AIX, Windows, HP-UX, and Linux, specify an integer from
1 to 65535.
You must specify this parameter when you are using method 3.
Optional
svolportnum
Model of the storage system that includes the P-VOLRequired
pvolarraytype
Serial number of the storage system that includes the P-VOLRequired
pvolserialnum
#
Device number of the P-VOL
For P9500 and XP24000/XP20000:
Specify this parameter as a decimal number or colon-delim-
ited hexadecimal number in the format ww:xx:yy, where
ww is the LDKC number, xx is the CU number, and yy is the
LDEV number. ww is optional. If ww is omitted, LDKC is as-
sumed to be 0.
For XP12000/XP10000/SVS200:
Specify this parameter as a decimal number or colon-delim-
ited hexadecimal number in the format xx:yy, where xx is
the CU number, and yy is the LDEV number.
The execution results are output in decimal.
Required
pvoldevnum
#
CLI Reference Guide 285