Setup and Install

NOTE: If you select this option, the user's e-mail address must be registered with the Internet
fax service provider in order to fax successfully.
8. Click Apply to save the Internet fax settings.
LAN fax
Figure 3-30 Fax tab – LAN fax option
1
2
3
4
5
6
7
The LAN fax option on the Fax tab contains the following elements.
Table 3-22 Fax tab — LAN fax
Callout Component Description
1 Enable Fax Send Click to select the Enable Fax Send check box.
2 Fax Send Method Select the Fax Send Method from the drop-down menu.
3 Lan Fax Service
Settings
Select the Third-party LAN fax product and the File Format from the drop-
down menus.
4 Folder Settings Select the Network Type from the drop-down menu, and then type in the UNC
Folder Path or click Browse to navigate to the correct path.
Type in the Windows Domain, Username, and Password, and then click
Verify Folder Access to test the settings.
5 Dialing Settings Configure the following dialing settings.
●
Maximum retry attempts
●
Retry interval (minutes)
100 Chapter 3 Installation and configuration ENWW