HP Smart Array Cluster Storage System

Cluster Installation and Configuration
5-2 HP Smart Array Cluster Storage System User Guide
HP CONFIDENTIAL
Writer: Rob Weaver File Name: f-ch5 Cluster Installation and Configuration
Codename: Aurora Part Number: 240333-003 Last Saved On: 11/6/02 1:05 PM
b. Connect the VHDCI SCSI cables to the storage system and servers.
For Microsoft or Linux operating systems, connect the Ethernet crossover
cable between the servers. Use the RJ-45 connectors identified as NIC 1 on
each server.
c. Connect peripheral devices, such as a keyboard, mouse, or monitor.
IMPORTANT: HP recommends the use of a KVM switchbox. Refer to the documentation
that ships with the switchbox.
6. Connect the power cords.
IMPORTANT: HP recommends the use of an uninterruptible power supply (UPS).
Contact the nearest authorized reseller.
7. Depending on the operating system, use the appropriate section in this chapter to
set up and configure the cluster.
Microsoft Windows 2000 Advanced Server Setup and
Configuration
Use the procedures in this section to set up and configure the cluster with Microsoft
Windows 2000 Advanced Server operating system.
Configuring the Cluster
Preconfiguration Checks
Be sure that the following items are available for configuring the cluster:
• SmartStart CD 6.1 or later
• Microsoft Windows 2000 Advanced Server software and documentation
• Microsoft Windows 2000 Advanced Server Service Pack 3 or later