-
(044)361-05-06 ICQ:495-089-192 (067)469-02-12 ICQ:613-211-859 (099)048-99-03 (093)672-77-76 User's Manual DVD/CD/USB receiver JVC KW-AVX846 with Bluetooth In the online store Winauto you also can buy DVD/CD/USB receiver JVC KW-AVX846 . Delivery in Kiev and throughout Ukraine with payment upon receipt! http://winauto.
-
Car audio and car goods internet store Winauto DVD RECEIVER WITH MONITOR w in au to . ua KW-AVX846 For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual.
-
Car audio and car goods internet store Winauto Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS ua 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3.
-
Car audio and car goods internet store Winauto Cautions on the monitor: How to reset your unit • The monitor built in this unit has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not considered defective. • Do not expose the monitor to direct sunlight. • Do not operate the touch panel using a ball-point pen or similar tool with the sharp tip. Touch the buttons on the touch panel with your finger directly (if you are wearing a glove, take it off).
-
Car audio and car goods internet store Winauto Contents How to reset your unit ........................................... 3 How to forcibly eject a disc .................................... 3 Sound adjustment ................................32 Using the sound equalization ............................. 32 Adjusting the cross over frequency ...................... 33 INTRODUCTIONS Changing display design .......................34 Setting for video playback ....................
-
Car audio and car goods internet store Winauto INTRODUCTIONS Detaching/attaching the monitor panel Cautions • Hold the monitor panel securely so as not to drop it accidentally. • Fit the monitor panel onto the attaching plate until it is firmly locked. Detaching 3 On the source control screen: ua 1 au to . 2 The monitor panel is unlocked. Attaching plate w in • The attaching plate closes automatically about 10 seconds after the monitor panel is unlocked. 4 The monitor panel opens by about 50°.
-
Car audio and car goods internet store Winauto Initial Settings When you power on the unit for the first time or reset the unit, the initial setting screen appears. • You can also change the settings on the screen. (☞ page 39) 3 Finish the procedure. 1 Turn on the ignition switch. The power is turned on, and the initial setting screen appears. Text Language au to . ua 2 Select the text language used for on-screen information. (☞ page 42) Select the use of the LINE IN jacks.
-
Car audio and car goods internet store Winauto Canceling the display demonstration and setting the clock Canceling the display demonstration 2 Display screen. 1 Display screen. 3 ua 2 Display screen. 3 Select . au to . 4 Set the clock time. w in Sets the clock manually. (☞ below) Synchronizes the clock time with Radio Data System. 4 Finish the procedure.
-
Car audio and car goods internet store Winauto Common operations • Attenuates the sound. (Press) (☞ page 9) • Displays screen. (Hold) (☞ page 10) Remote sensor Turning on the power Motion sensor (☞ page 41) Turning off/on the AV source Turn on the ignition switch. • The power is turned off when the ignition switch is turned off. au to . 1 Display screen. Turning off/on the screen 2 1 Display screen.
-
Car audio and car goods internet store Winauto Adjusting the volume Ejecting the disc/adjusting the monitor panel To adjust the volume • About the adjustable volume range, ☞ page 39 (). 1 On the source control screen: 2 • You can also adjust the volume by moving your finger on the touch panel as illustrated. Increase ua Decrease Open] Eject] Close] Tilt +/ Tilt –] [Detach] au to . [ [ [ [ To attenuate the sound The ATT indicator lights up.
-
Car audio and car goods internet store Winauto Switching screens Source control screen Common operating buttons NAVI] *1 Displays navigation screen. *2 (☞ page 30) [ [ ] (☞ below) [ ] [TP] Displays screen. (Press) (☞ page 9) Changes the detailed settings. (☞ page 39) au to . Displays source control screen/setting screen and changes picture source. ] ua [ • Displays the phone control screen. (Press) • Switches to the last connected mobile phone.
-
Car audio and car goods internet store Winauto AV SOURCE OPERATIONS ua Selecting the playback source Switches to the radio broadcast. DISC (☞ page 17) Plays a disc. USB (☞ page 24) Plays files on a USB device. iPod (☞ page 26) au to . TUNER (☞ page 12) Plays an iPod/iPhone. Bluetooth (☞ page 51) Plays a Bluetooth audio player. AV-IN* (☞ page 29) Switches to an external component connected to LINE IN/VIDEO IN jacks on the rear panel. AV Off Turns off the AV source.
-
Car audio and car goods internet store Winauto Listening to the radio DX/LO indicator Standby reception indicators ST/MO indicator Sound mode (☞ page 32) AF indicator The station frequency currently tuned in/PS (station name) for FM Radio Data System when PS signal is coming in Band Preset no. PTY code for FM Radio Data System Preset list ua ☞ page 15 • The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.
-
Car audio and car goods internet store Winauto When an FM stereo broadcast is hard to receive... When the FM reception is interfered... 1 Activate monaural mode for better reception. 1 2 ua 2 Auto Off Activate monaural mode to improve FM reception, but stereo effect will be lost. The MO indicator lights up. Wide Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. au to . On Restore the stereo effect.
-
Car audio and car goods internet store Winauto Storing stations in memory Selecting a preset station You can preset six stations for each band. Automatic presetting—SSM (Strongstation Sequential Memory) (For FM only) 1 2 (Hold) ua The following features are available only for FM Radio Data System stations. Searching for FM Radio Data System program—PTY Search You can search for your favorite programs being broadcast by selecting the PTY code for your favorite programs. au to .
-
Car audio and car goods internet store Winauto Activating/deactivating TA/News Standby Reception TA Standby Reception News Standby Reception 1 TP indicator 2 TA Standby Reception Lights up The unit will temporarily switch to Traffic Announcement (TA) if available. Flashes Not yet activated. Tune in to another station providing the Radio Data System signals. Goes off Deactivated. au to .
-
Car audio and car goods internet store Winauto Tracing the same program —Network-Tracking Reception Automatic station selection— Program Search When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM Radio Data System station of the same network, possibly broadcasting the same program with stronger signals. Usually when you select preset stations, the preset station is tuned in.
-
Car audio and car goods internet store Winauto Disc operations Playing a disc • If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. Inserting a disc 1 To eject a disc 1 On the source control screen: 2 Press [ Eject]. ua 2 On the source control screen: au to . • You can eject a disc when playing another AV source.
-
Car audio and car goods internet store Winauto Playable disc type Disc type Recording format, file type, etc DVD • DTS sound cannot be reproduced or emitted from this unit.
-
Car audio and car goods internet store Winauto Playback operations To display the source control screen (☞ below) • The operation buttons disappear when no operation is done for about 10 seconds. For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG Sound mode (☞ page 32) [ ][ ua ☞ page 9 ]*2 Selects playback mode. (☞ page 22) Starts playback/pauses. Stops playback. • Selects chapter. (Press) • Reverse/forward search.
-
Car audio and car goods internet store Winauto For CD/MP3/WMA/WAV Sound mode (☞ page 32) Audio format Media type Playback mode (☞ page 22) Playing time Playback status (3: play / 8: pause ) While playing, “Jacket picture” is shown if the file has the tag data including “Jacket picture.” ][ ] Track/file information • Touching an information bar scrolls the text if all the text is not shown. Selects playback mode. (☞ page 22) Displays folder/track list. (☞ below) Starts playback/pauses.
-
Car audio and car goods internet store Winauto Video menu operations [ You can display the video menu screen while watching the playback pictures on the screen. • Available items on the screen differ depending on the types of the loaded disc and playback files. • The operation buttons disappear when no operation is done for about 10 seconds. ] [ ] [ ] [Menu] Touch any position of the screen other than operation buttons. [Top Menu] ] au to . ua [ Selects the audio type.
-
Car audio and car goods internet store Winauto • To deactivate the PBC function, press [7] then the direct selecting buttons to select a track number. Only for VCD 1 Selecting playback mode For DVD/DVD-VR 2 Selects Repeat playback mode For VCD (without PBC)/CD/DivX/MPEG1/MPEG2/MP3/ WMA/WAV ] [Return] [Menu] [Adjust] mode at the same time. • Each time you press the button, the playback mode changes. (The corresponding indicator lights up.
-
Car audio and car goods internet store Winauto Settings for disc playback Disc Setup items Selectable setting/item Initial: Underlined Menu Language Select the initial disc menu language; Initial English (☞ page 58). Select the initial subtitle language or erase the subtitle (Off); Initial English (☞ page 58). Down Mix When playing back a multi-channel disc, this setting affects the signals reproduced through the FRONT OUT/REAR OUT jacks.
-
Car audio and car goods internet store Winauto USB operations Playing a USB device • This unit can play JPEG/MPEG1/MPEG2 */MP3/WMA/ WAV files stored in USB mass storage class device. • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • Make sure all important data has been backed up to avoid losing the data. Cautions: • This unit may not play back files in a USB device properly when using a USB extension cord.
-
Car audio and car goods internet store Winauto To display the source control screen (☞ below) • The operation buttons disappear when no operation is done for about 10 seconds. • To change settings for video playback, ☞ page 36. Sound mode (☞ page 32) Playback mode (☞ below) Playing time Audio format Video format— MPEG/JPEG • MP3/WMA/WAV: Folder no./ Track no. • JPEG: Folder no./File no. ] ua Selects repeat mode. *1 *2 SONGS: Repeats current track. • • FOLDER: Repeats all tracks of the current folder.
-
Car audio and car goods internet store Winauto Listening to the iPod/iPhone device Preparation Connecting iPod/iPhone Settings for iPod playback When the source is “iPod”... To iPod/iPhone 1 USB cable from the rear of the unit 2 ua • Use the following cables: – To listen to the music (digital): USB 2.
-
Car audio and car goods internet store Winauto iPod/iPhone playback operations To display the source control screen (☞ below) • The operation buttons disappear when no operation is done for about 10 seconds. • To change settings for video playback, ☞ page 36. • The operations explained in this manual are under
mode (☞ page 26). Sound mode (☞ page 32) Playback mode (☞ below) Playback status ( 3: play/8: pause) au to . ua Track no.
-
Car audio and car goods internet store Winauto Video menu: Selecting a track/video from menu on the iPod/iPhone Switches between Music ( ( ) ) and Video 1 • Available categories differ depending on the type of your iPod/iPhone. 2 Select the menu (Music or Video) (1), a category (2), then a desired item (3). Music menu: ) and Video the corresponding tab: Playlist ( Albums ( ) or Songs( ). ), Artist ( ), Setting for watching video au to .
-
Car audio and car goods internet store Winauto Using other external components To display the source control screen (☞ below) • The operation buttons disappear when no operation is done for about 10 seconds. • To change settings for video playback, ☞ page 36. Sound mode ( ☞ page 32) [Mode] [AV MENU] Changes the AV-IN name. • Press [2] or [3] to select an AV-IN name. Displays screen. 1 Select “AV-IN” as the source. (☞ page 11) 2 Turn on the connected component and w in AV-IN au to .
-
Car audio and car goods internet store Winauto Using the external navigation unit You can connect a navigation unit (not supplied) to the RGB input terminal so that you can view the navigation screen. (☞ the Installation/Connection Manual) • Please contact your dealer to inquire about compatible navigation units. • While the navigation screen is displayed, the touch panel operations are available only for using navigation function.
-
Car audio and car goods internet store Winauto Rear source operations You can enjoy the rear source playback on the external monitor connected to the VIDEO OUT and 2nd AUDIO OUT jacks, while listening to any source. Activating the rear source 1 Operations on the external monitor (from the remote controller only) On : Selecting a folder or track on the control screen For DivX/MPEG1/MPEG2/JPEG/MP3/WMA/WAV/ CD/iPod • DivX/MPEG1/MPEG2/JPEG: While playback is stopped. • CD/iPod: Skip step 1.
-
Car audio and car goods internet store Winauto Sound adjustment Using the sound equalization • The adjustment is memorized for each source until you adjust sound again. If the source is a disc, the adjustment is stored for each of the following categories. – DVD/DVD-VR – VCD/CD – DivX/MPEG1/MPEG2/MP3/WMA/WAV • You cannot adjust the sound when the AV source is turned off. Selecting a preset sound mode On : Customizing preset sound mode 1 Select a sound mode.
-
Car audio and car goods internet store Winauto Adjusting the sound precisely Adjusting the cross over frequency 1 Perform steps 1 and 2 of “Selecting a preset sound mode,” then... 1 On : 2 Select a band. 2 ua 3 Adjust the sound. 3 Select the item to adjust, then make au to . adjustment. Adjusts the cross over for front or rear speakers (high pass filter). Reset Freq Q w in Bass SW Level Changes level of Low/Mid/ High to 0. Selects frequency. Adjusts the width of the frequency.
-
Car audio and car goods internet store Winauto Changing display design You can change the background, the color of text and touch panel buttons. 1 On : 2 Select/adjust the color 2 Color palette Dimmer setting: You can make selections for each dimmer setting—< > (On) or < > (Off) ua User color adjuster: You can make your own color adjustment stored in au to . Text/Buttons For setting the color, ☞ above.
-
Car audio and car goods internet store Winauto Using your favorite scene as the background 5 Capture the image displayed on the screen. While playing a video or JPEG, you can capture an image and use the captured image as a background. • You cannot capture copyrighted content and image from iPod/iPhone. • When using JPEG file as the background, make sure that the resolution is 800 x 600 pixels. • The color of the captured image may look different from that of the actual scene.
-
Car audio and car goods internet store Winauto Setting for video playback You can change the setting for video playback. 4 Adjust the picture (–15 to +15). Picture adjustment You can adjust the picture quality. Adjusts the brightness Adjusts the contrast Adjusts the black Adjusts the color Adjusts the tint * Adjusts the detail 1 Touch any position of the screen other than operation buttons. ua * Adjustable only when the incoming signal is NTSC. au to . 2 3 Select Dimmer On (< >) or Off >).
-
Car audio and car goods internet store Winauto Changing the aspect ratio Zooming picture You can change the aspect ratio for video playback. You can zoom the picture ( to ). • When is set to or (☞ left column), the picture is zoomed with the aspect ratio of the setting. 1 Touch any position of the screen other than operation buttons. 1 Touch any position of the screen other than operation buttons. ua 2 2 au to .
-
Car audio and car goods internet store Winauto Using a rear view camera • To use a rear view camera, the REVERSE GEAR SIGNAL lead connection is required. For connecting a rear view camera, see the Installation/Connection Manual. Activating the rear view camera 1 Displaying the picture from the rear view camera On : The rear view screen is displayed when you shift the gear to the reverse (R) position. ua 2 au to .
-
Car audio and car goods internet store Winauto Setting menu items • You cannot change
-
Car audio and car goods internet store Winauto Selectable setting/item Speaker Select Select the size of the connected speaker. ♦ Standard/Narrow/Middle/Wide Dimmer ♦ Auto ♦ On ♦ Off ♦ Dimmer : Dims the screen and button illumination when you turn on the headlights. • The ILLUMINATION CONTROL lead connection is required. (☞ the Installation/Connection Manual) : Activates dimmer. : Cancels. : Sets the Dimmer On ( )/Off ( ) times. • Press [5] or [∞] to set the time.
-
Car audio and car goods internet store Winauto Menu item Selectable setting/item Display Sensor Initial: Underlined Change the condition for turning off/on the screen and the light of MENU/ ATT button. Sensor: Select the condition of the screen for turning on. ♦ Motion : The screen turns on when your hand moves closer to the motion sensor. ♦ Touch : The screen turns on when your finger touches the touch panel. ♦ Off : The screen is always turned on while the power is turned on.
-
Car audio and car goods internet store Winauto Selectable setting/item Initial: Underlined Select the text language used for on-screen information. ♦ English/Spanish/French/German/Italian/Dutch/Swedish/Danish/ Russian/Portuguese/Chinese-Simplified/Chinese-Traditional/ Thai/Turkish/Arabic/Persian/Hebrew GUI Language Select the language ( or : the language selected above) used on operation buttons and menu items. Time Set Adjust the clock time.
-
Car audio and car goods internet store Winauto 2 Memorizing/recalling the settings Clears all settings memorized in , and < User3> You can memorize the settings changed in the menu and recall the memorized settings anytime. Memorizing your settings 1 On : A confirmation message appears. Press [Yes]. ua Adjusting the touch position You can adjust the touch position on the touch panel if the position touched and the operation performed do not match.
-
Car audio and car goods internet store Winauto BLUETOOTH OPERATIONS Information for using Bluetooth® devices • While driving, do not perform complicated operation such as dialing the numbers, using phone book, etc. When you perform these operations, stop your car in a safe place. • Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device. • This unit may not work for some Bluetooth devices.
-
Car audio and car goods internet store Winauto Connecting Bluetooth devices Connecting a new Bluetooth device for the first time 2 Change the PIN code. • If you skip changing PIN code, go to step 3. When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device. Pairing allows Bluetooth devices to communicate each other. To make pairing, you may need to enter the PIN (Personal Identification Number) code of your Bluetooth device you want to connect.
-
Car audio and car goods internet store Winauto To disconnect Connecting/disconnecting a registered Bluetooth device 1 Display the Bluetooth setting screen. (☞ page 45) • For Bluetooth mobile phone: Phone setting screen • For Bluetooth audio player: 2 A confirmation message appears. Press [Yes]. Deleting a registered Bluetooth device To connect Select the device you want to connect. On (☞ Step 2 on the left column): ua 1 2 Select a device to delete the au to .
-
Car audio and car goods internet store Winauto Using the Bluetooth mobile phone Receiving a call Switching between handsfree mode and phone mode When a call comes in/making a call... While talking... Status of the device/Battery reminder (only when the information comes from the device) Call information (if acquired) ua Ends/rejects the call Each time you press the button, the talking method is : handsfree mode / : phone switched ( mode).
-
Car audio and car goods internet store Winauto 1 Making a call Using the preset list/phone book/call lists On the source control screen: 1 Preset From preset list From dialled call list. From received call list. From missed call list. From phone book. • For copying the phone book, ☞ page 49. 2 Select a method to make a call. Preset list/call lists/phone book (☞ the right column) au to .
-
Car audio and car goods internet store Winauto Presetting the phone numbers Copying the phone book You can preset up to 6 phone numbers. 1 You can copy the phone book memory of a mobile phone into the unit (up to 400 memories). On the source control screen: 1 2 Select an item from phone book/call On the source control screen: 2 au to . ua lists. 3 Select a phone number. w in (Hold) 4 Select a preset number to store.
-
Car audio and car goods internet store Winauto Deleting the phone number memory in the unit About mobile phone compatible with Phone Book Access Profile (PBAP) 1 Display the preset list/phone book/call list you want to delete. (☞ page 48) If your mobile phone supports PBAP, the phone book and call lists are automatically copied to the unit when the mobile phone is connected.
-
Car audio and car goods internet store Winauto Using the Bluetooth audio player • To register a new device, ☞ page 45. • To connect/disconnect a device, ☞ page 46. Battery reminder (only when the information comes from the device) Sound mode (☞ page 32) Playback mode *1 (☞ below) Track no./Playing time *1 Playback status (3: play / 8: pause) *1 ☞ page 10 ua Tag data (current track title/artist name/album title) *1 • Touching an information bar scrolls the text if all the text is not shown.
-
Car audio and car goods internet store Winauto Bluetooth device settings Bluetooth audio player On “BT Audio” source control screen: Mobile phone Menu items Selectable setting/item Initial: Underlined Connection ♦ Connect ♦ Disconnect PIN Code Changes the PIN code of the unit. • Touch the current PIN code, enter a new PIN code, then press [Save]. Device Name Shows the device name to be shown on the Bluetooth device — ”JVC Unit.
-
Car audio and car goods internet store Winauto REFERENCE Using the remote controller If the effectiveness of the remote controller decreases, replace the batteries. Installing the batteries R03/LR03/AAA Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). Insert the batteries into the remote controller by matching the polarity (+ and –) correctly.
-
Car audio and car goods internet store Winauto Button VOL +/VOL – Operations Button • Adjusts the volume level. • “2nd VOL” function does not work for this unit. SOURCE Selects the source. 6 Starts/pauses* playback. PHONE / Answers incoming calls. BAND / 7/ • • • • 0–9 (☞ page 55) • Enters a number while holding SHIFT. • “SETUP” function does not work for this unit. 1–6 Enters preset station number while holding SHIFT. ASPECT Changes the aspect ratio.
-
Car audio and car goods internet store Winauto Searching for an item directly Various disc operations Tuner frequency 1 Press DIRECT while holding SHIFT to enter the search mode. 2 Press number buttons while holding SHIFT to enter a frequency. • To erase a misentry, press CLR (clear) while holding SHIFT. 3 Press ENT to confirm the entry. Using the disc menu • DVD-Video/DVD-VR 1 For DVD Video, press TOP M or MENU. For DVD-VR, press...
-
Car audio and car goods internet store Winauto Maintenance Caution on cleaning the unit To keep discs clean Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. Recommended cleaning method: Gently wipe the panel with a soft, dry cloth. A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge.
-
Car audio and car goods internet store Winauto More about this unit Playing MP3/WMA/WAV files File playback • This unit can play back files with the extension code <.mp3>, <.wma>, or <.wav> (regardless of the letter case—upper/lower). • This unit can play back the files meeting the conditions below: – Bit rate: MP3/WMA: 32 kbps — 320 kbps – Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz (for MPEG1) 24 kHz, 22.05 kHz, 16 kHz (for MPEG2) 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz (for WMA) 44.
-
Car audio and car goods internet store Winauto Sound signals emitted through the rear terminals Through the analog terminals (Speaker out/REAR OUT/FRONT OUT ) 2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
-
Car audio and car goods internet store Winauto w in au to . ua • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. • DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used under license. • ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc.
-
Car audio and car goods internet store Winauto Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components). • Messages (enclosed in “ ”) in the tables below are shown in the language selected on (☞ page 42).
-
Car audio and car goods internet store Winauto If there seems to be a problem DivX/MPEG1/MPEG2/ JPEG/MP3/WMA/WAV Remedy/Cause No sound comes out of the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. No picture is displayed on the screen. Turn on the screen. (☞ page 8) Reset the unit. (☞ page 3) The sensor display may malfunction when there is an object close to the motion sensor. In this case, select for .
-
Car audio and car goods internet store Winauto “Now Reading...” keeps flashing on the screen. Turn off the power and on again. While playing a track, sound is sometimes interrupted. The tracks are not properly copied into the USB device. Copy tracks again, and try again. No sound comes out of the speakers. • Disconnect the iPod, then connect it again. • Select another source and then reselect “iPod”. The iPod/iPhone does not turn on or does not work. • • • • Sound is distorted.
-
Car audio and car goods internet store Winauto Remedy/Cause • Reduce the distance between the unit and the Bluetooth mobile phone. • Move the car to place where you can get a better signal reception. The sound is interrupted or skipped while using a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Disconnect the device connected for Bluetooth phone. • Turn off, then turn on the unit. • (When the sound is not yet restored) connect the player again.
-
Car audio and car goods internet store Winauto Specifications Load Impedance Equalizer Control Range Level Signal-to-Noise Ratio Audio Output Level Line-Out Level/Impedance FRONT OUT, REAR OUT, Output Impedance SUBWOOFER OUT Video Output (composite) Color System VIDEO OUT Video-Out Level/Impedance Other Terminals Input Others FM AM AM Tuner Signal Detection System Frequency Response DVD/CD PAL/NTSC 1 Vp-p/75 Ω LINE IN, VIDEO IN, CAMERA IN, USB input, MIC IN, AUX, Antenna input 2nd AUDIO OUT OE REMOTE,
-
Car audio and car goods internet store Winauto au to . ua USB 2.0 Full Speed Full Speed Maximum 12 Mbps Low Speed Maximum 1.5 Mbps Compatible Device Mass storage class Compatible File System FAT 32/16/12 Max. Current DC 5 V 1 A Version Bluetooth 2.0 certified Output Power +4 dBm Max. (Power class 2) Service Area Within 10 m Profile HFP (Hands-Free Profile) 1.5 OPP (Object Push Profile) 1.1 A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio/Video Remote Control Profile) 1.
-
Car audio and car goods internet store Winauto 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 ち nhひng quごc gia mà bXn có thう sば dとng chぬc n@ng Bluetooth® Els països on podrà fer servir la funció Bluetooth® Zemlje u kojima je dozvoljena upotreba Bluetooth® funkcije. Zemlje u kojima možete koristiti Bluetooth® funkciju Zemlje u kojima je dopušteno koristiti Bluetooth®.
-
Car audio and car goods internet store Winauto Country Türkiye 台湾 United States of America Venezuela Vietnam Viおt Nam South Africa ENingizimu Afrika Suid-Afrika w in au to .
-
ua Car audio and car goods internet store Winauto au to .