User guide
ID 1022-8317, Rev. 2.0
Command Syntax NetBootLoader
Page 76
USAGE: Swap the NBL Flashes temporarily and verify
COMMAND / RESPONSE:
NetBtLd> swap -t
Flash config swapped till next reboot via
HOST bit
NetBtLd>
NetBtLd> swap
Active Flash is NOR flash 1
Fallback Flash is NOR flash 0
Configuration Details:
IPMI : straight
HOST : reverse
DIP SW : straight == off
NetBtLd>
Swap the NBL flashes permanently
COMMAND / RESPONSE:
NetBtLd> swap -p
Flash config permanently swapped
NetBtLd>
SWAP (Two NBL Flashes)