User`s guide

Target PC Command-Line Interface
6-5
2 Type a scope command. For example, to add a target scope (scope 2) in the
model
xpcosc, type
addscope 2
xPC Target adds another scope monitor to the target PC screen. The
command window displays a message to indicate that the new scope has
registered.
Scope: 2, created, type is target S0
3 Type a scope command. For example, to add a signal (0) to the new scope,
type
addsignal 2=0
The command window displays a message to indicate that the new
parameter has registered.
Scope: 2, signal 0 added
You can add as many signals as necessary to the scope.
4 Type a scope command. For example, to start the scope 2, type
startscope 2
The target scope 2 starts and displays the signals you added in the previous
step.
Note If you add a target scope from the target PC, you need to start that
scope manually. If a target scope is in the model, starting the target
application starts that scope automatically.