User`s guide

13 Target PC Command-Line Interface Reference
13-6
The following table lists the syntax for the target commands that you can use
on the target PC. The MATLAB equivalent syntax is shown in the right
column. The target object name
tg and the scope object name sc are used as an
example for the MATLAB methods.
Target PC
Command
Description and Syntax MATLAB Equivalent
addscope addscope scope_index
addscope
tg.addscope(scope_index)
tg.addscope
remscope remscope scope_index
remscope all
tg.remscope(scope_index)
tg.remscope
startscope startscope scope_index sc.start
or +sc
stopscope stopscope scope_index sc.stop
or -sc
addsignal addsignal scope_index =
signal_index1,
signal_index2, . . .
sc.addsignal(signal_
index_vector)
remsignal remsignal scope_index =
signal_index1,
signal_index2, . . .
sc.remsignal(signal_
index_vector)
viewmode
Zoom in to one scope or
zoom out to all scopes.
Syntax:
viewmode
scope_index
or left-click
the scope window
viewmode 'all' or
right-click any scope
window
Press the function key for
the scope, and then press
V
to toggle
viewmode.