Users Manual Part 2

Vehicle Monitoring and Locating System Mobile Video Computing Solutions LLC
Tow Truck Installation Procedures
26 September 21, 2021
Right Pylon
Left Pylon
Installation Steps
1) Choose a stable mounting location high up and outboard on driver and passenger
side pylons. Cameras should be mounted as high as possible for good viewpoints.
2) Position the camera in the chosen location and mark holes for mounting screws
and for camera cable pass-through into vehicle.
3) Drill holes for self-tapping sheet metal screws and for the round camera
connector.
4) Pass the round connector of the camera cable through the drilled hole from the
inside to the outside and connect to the camera cable.
5) Mount the camera to the vehicle using sheet metal screws.
6) Do not tighten screws until camera has been aimed properly.
7) If the MDVR isn’t powered up yet, don’t securely tighten the camera aiming
screws until the camera aiming step later.
This section intentionally blank