Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
9-10 VPN Firewall and Network Management
v1.0, January 2010
To configure the VPN firewallfor remote management:
1. Select Administration > Remote Management from the main/submenu. The Remote
Management screen is displayed.
2. Click the Ye s radio button to enable secure HTTP management (enabled by default), and
configure the external IP addresses that will be allowed to connect.
a. To allow access from any IP address on the Internet, select Everyone.
b. To allow access from a range of IP addresses on the Internet, select IP address range.
Enter a beginning and ending IP address to define the allowed range.
c. To allow access from a single IP address on the Internet, select Only this PC.
Enter the IP address that will be allowed access.
3. Configure the port number that will be used for secure HTTP management. The default port
number is 443.
Figure 9-3