User Guide

78 Novell Distributed Print Services Administration Guide
Novell Distributed Print Services Administration Guide
103-000137-001
August 31, 2001
Novell Confidential
Manual 99a38 July 17, 2001
 “Modifying Configurations” on page 80
 “Setting Configuration Locks” on page 81
Creating Configurations
Use the following procedure in NetWare Administrator to create a new
configuration based on the current Default Configuration.
1 Select the NDPS Printer object that you want to create a configuration for.
2 Click the Configuration button.
The Printer Configurations window in that dialog lists the Default Printer
Configuration and any other configurations that have been created for this
printer in NetWare Administrator.
3 Click Create.
4 Enter the name you want to assign to this configuration.
5 Assign the configuration properties you want for print jobs.
For specific information about these tabs, see “Configuration Options” on
page 78.
If you want to lock certain configuration properties so that workstation
users cannot modify them, see “Setting Configuration Locks” on page 81.
6 Click OK in the Printer Configuration dialog box.
7 Click OK in the NDPS Printer Details dialog box.
Your new configuration will not be saved until you have done this.
Configuration Options
The following sections describes the configuration options available in NDPS.
General Properties
 Copies: The number of copies that will be printed for this configuration.
Max Copies: The maximum number of copies that a user can print using
this printer.
 Priority: The priority assigned to jobs using this configuration.
Max Priority: The maximum priority (Low, Medium, High) set by the
administrator for jobs using this printer. This setting determines when the