User Guide

56 Storage Management Services Administration Guide
Storage Management Services Administration Guide
103-000134-001
August 29, 2001
Novell Confidential
Manual 99a38 July 17, 2001
4
Select where you want your backup data to go.
4a Double-click Where to Backup.
4b Change to the correct eDirectory tree structure and context by
clicking the Change to Context button on the toolbar.
4c Double-click Queues.
4d Select a Queue object from the list.
4e Right-click the server to open the drop down box.
4f Click Submit the Job.
This step allows you to submit the job to a queue on the chosen server
or on the chosen media type.
Queue. Double-click to expand the queue.
Server. Double-click to expand the queue, double-click to select a
server, and then right-click to submit the job.
Media. Double-click to expand the queue, double-click to select a
server, double-click to view a list of devices, double-click to view a
media list, and then right-click to submit the job.
Backing Up Cluster-enabled Pools from the Server
1 Load the SBCON modules.
See “Loading SBCON” on page 46.
2 Click Main Menu > Job Administration > Backup.
3 Click Target Service to select a cluster-enabled pool name.
To be able to select the target, you need to load the correct Target Service
Agent (TSA). See “Loading the Target Service Agents” on page 45.
If you do not see the target you want on the list, check for these possible
causes:
 The correct Target Service Agent is not loaded on either the host or
the target. See “Server Console Commands for Backup and Restore
of Various Target Services” on page 45 for LOAD commands.
 Network traffic is heavy. Press Esc to return to the Main Menu, and
then press Enter again. Your target should now be listed.
4 Select a target from the Target Services list.