User Manual

12
Configuration
●
Status
From the window, the general information on the status of currently connected entry is
presented. You may click Rescan button to reinitiate the scanning process and update the
status. Later the result of scanning will be renewed and displayed in the window. If you want to
stop the network connection, click the Disable Radio button to stop scanning. However, if you
are already in the disabled radio mode, you would find the Enable Radio button instead. Click
Enable Radio button to regain the link.
Note: The text before “PRISM Wireless Settings” in the caption bar of the dialog box is the
profile name of the current connection. Thus, the caption contexts vary according to the
connectivity at the given time. From the above picture, the associated profile is named
“Default”.
State
The field shows the association status to available Access Point with the MAC address of the
Access Point.
Current Tx Rate
Shows the highest transmit rate of the current association.
Current Channel
Shows the channel on which the connection is made.
Disable Radio
Disable/Enable radio signal.
Rescan
Rescan the association status.