Technical data

26
Chapter 2: Installing the Sled-Mounted DLT2000XT Tape Drive
4. Orient the drive and sled assembly so that the connectors on the back are on the
bottom half of the drive and face away from you, as shown in Figure 2-14.
Figure 2-14 Installing the DLT2000XT Tape Drive in the Vault SCSIBox 2
5. Carefully insert the device into the drive bay until it seats firmly into the lever catch
and the locking lever has moved all the way to the right. Push the lever down to
ensure that it is fully engaged.
6. Close the SCSIBox door and secure the captive wing nuts.
Drive tray
DLT2000XT
SCSI
backplane