User guide

78
Connecting Paired Handsfree Devices,
Etc.
Activate Bluetooth
®
first.
In Standby, Settings Wireless &
networks
Bluetooth settings
Bluetooth settings opens.
Select device
The device is connected.
Accepting Connection Requests
Handset automatically accepts connection requests from
paired devices. For unpaired devices, enable Discoverable
( ) first; when connection request arrives, follow
onscreen prompt.
Bluetooth
®
Connection Operations
Unpairing Devices
In Bluetooth settings, select device (Long)
Unpair (or Disconnect & unpair )
Disconnecting Handsfree Devices, Etc.
In Bluetooth settings, select device OK
Allowing Other Devices to Detect Handset
In Bluetooth settings, Discoverable ( )
・Discoverable is effective for 120 seconds, then turns off
automatically.
Accepting Connection Requests while Connected
to a Device
In Bluetooth settings, Detailed Bluetooth Settings
Multiple connect standby ON
Receiving Files (e.g., Address Book via All File
Transfer)
When file reception request arrives, appears on Status
Bar. Follow these steps to receive files:
In Standby, Select notification
Accept After receiving files, in Standby
Select notification Select file (.vcf)
Register of data Enter Handset Code
OK Select option
・If confirmation appears, follow onscreen instructions.
・Received files are saved to SD Card; open them from
Contents Manager.
Sending Single Files (e.g., Address Book)
In Standby, Select contact (Long)
Send by Bluetooth Yes Select
device
・If an image is set for selected contact, image transfer
confirmation appears.
Sending Selected Files (e.g., Address Book)
In Standby, Send by Bluetooth
Select and send Select contacts
( ) Yes Select device
・If a contact with image is included, image transfer
confirmation appears.