Software User Guide Manual

7
3 Quick Start
Step 1 Start up
1) Turn on the laptop by pressing the power button.
2) Once Windows® started, launch the OBSI software from the start menu.
Step 2 Connexions
1) Connect the microphones to the DSP input connectors using appropriate cabling:
• Channel 1: Leave unconnected,
• Channel 2: Tachometer,
• Channel 3: Leading Edge Probe – Mic A,
• Channel 4: Leading Edge Probe – Mic B,
• Channel 5: Trailing Edge Probe – Mic A,
• Channel 6: Trailing Edge Probe – Mic B.
Right Side