Manual

8
Model: TX-178 Article No. 4973, 01/2022
CD compartment:
Remove the paper protection Disk from the CD compartment before
inserting a CD. Not removing the paper protection disk causes playback
issues. Caution: Not removing the paper protection disk might could cause
fire! Remove it before use!
First start
Set language, confirm the privacy policy for My mediaU and get the network
ready.
Note: WiFi allows date transfer over short distances within 20 meters
without the need of cabling between the devices, any walls or ceilings may
reduce the strength of the WiFi connectivity.
1. Plug in the power adapter to the back of the TX-178 and the other end
to a power socket. The TX-178 powers on and starts up.
2. Choose the language to operate the TX-178 in.
By either rotating the knob (12) on the TX-178 and
pressing it (Enter) after finding the correct
language. Or use the arrows up (13) or down (17)
on the remote to choose the language and
confirm it by pressing Enter (15).
3. Configure the WiFi network
3.1 Enable “Check network when power on”?
press Yes. This causes the device to check for the
WiFi network every time the TX-178 is powered
on and automatically connects with the available
saved network.
3.2 Would you like to configure the network now?
- Select Yes to establish connection to the
network manually.
- Select Yes(WPS) (Only for WPS routers).Then
press the WPS button on your router.