User manual

Timer_B Registers
13-24 Timer_B
CCIE
Bit 4 Capture/compare interrupt enable. This bit enables the interrupt request of
the corresponding CCIFG flag.
0 Interrupt disabled
1 Interrupt enabled
CCI
Bit 3 Capture/compare input. The selected input signal can be read by this bit.
OUT
Bit 2 Output. For output mode 0, this bit directly controls the state of the output.
0 Output low
1 Output high
COV
Bit 1 Capture overflow. This bit indicates a capture overflow occurred. COV must
be reset with software.
0 No capture overflow occurred
1 Capture overflow occurred
CCIFG
Bit 0 Capture/compare interrupt flag
0 No interrupt pending
1 Interrupt pending