- TMS370 Microcontroller/Gang Programmer User's Guide

Display Window Overview and Description
3-5
3.5 Display Window Overview and Description
The display window has two separate areas (see Figure 3–2): the PC
memory display (left half of screen) and the reverse assembled code (right half
of screen).
The programmer displays the PC memory in a hexadecimal format. The
memory address occupies the left-most column of each line, followed by eight
bytes of PC memory contents. Next on the display line are eight characters that
represent the PC memory contents as ASCII values. Nonprintable ASCII char-
acters are represented by the . character.
The address range for the PC memory is from 0000h to FFFFh. Access to the
PC memory out of this range is not allowed. The programmer maintains the
array as a circular buffer so that any scrolling that exceeds the limits is wrapped
around.
The reverse-assembled code window contains the disassembled code from
the PC memory.
Figure 3–2. PC Memory Display and Reverse Assembled Code Windows
F L O M P S U V E C
0000 00 00 00 00 00 00 00 00 ........ 0000 0000 JMP 0002
0008 00 00 00 00 00 00 00 00 ........ 0002 0000 JMP 0004
0010 00 00 00 00 00 00 00 00 ........ 0004 0000 JMP 0006
0018 00 00 00 00 00 00 00 00 ........ 0006 0000 JMP 0008
0020 00 00 00 00 00 00 00 00 ........ 0008 0000 JMP 000A
0028 00 00 00 00 00 00 00 00 ........ 000A 0000 JMP 000C
0030 00 00 00 00 00 00 00 00 ........ 000C 0000 JMP 000E
0038 00 00 00 00 00 00 00 00 ........ 000E 0000 JMP 0010
0040 00 00 00 00 00 00 00 00 ........ 0010 0000 JMP 0012
0048 00 00 00 00 00 00 00 00 ........ 0012 0000 JMP 0014
0050 00 00 00 00 00 00 00 00 ........ 0014 0000 JMP 0016
0058 00 00 00 00 00 00 00 00 ........ 0016 0000 JMP 0018
0060 00 00 00 00 00 00 00 00 ........ 0018 0000 JMP 001A
0068 00 00 00 00 00 00 00 00 ........ 001A 0000 JMP 001C
0070 00 00 00 00 00 00 00 00 ........ 001C 0000 JMP 001E
0078 00 00 00 00 00 00 00 00 ........ 001E 0000 JMP 0020
0080 00 00 00 00 00 00 00 00 ........ 0020 0000 JMP 0022
0088 00 00 00 00 00 00 00 00 ........ 0022 0000 JMP 0024
0090 00 00 00 00 00 00 00 00 ........ 0024 0000 JMP 0026
0098 00 00 00 00 00 00 00 00 ........ 0026 0000 JMP 0028
00A0 00 00 00 00 00 00 00 00 ........ 0028 0000 JMP 002A
ill oad utputCOFF ove rogm how pload erify dit onfig s s uit
PgDown PgUp Address DisAsm
F1 F2 F3 F4
Current Device: TMS370 C256 PCMODE
Y Q
All the commands are described briefly in Table 3–2. A complete description
of all display window commands can be found in Sections 3.6 through 3.17.
When you use the gang programmer, the BlankChk and mAster options are
added to the command line.