Installation Instructions
43
Minimum 12 months for sensors (use lithium batteries in cold weather climates less
than -20 °C)
16.4WiFiSpecifications
1. WIFI Standard: 802.11 b/g/n
2. WiFi Console RF Frequency: 2.4 GHz
3. Setup User Interface (UI) support setup device: Build-in WiFi with WAP mode smart
device, including laptops, computers, smart phones and smart pads.
4. Recommend web browser for setup UI: Web browser support of HTML 5, such as the
latest versions of Chrome, Safari, IE, Edge, Firefox or Opera.
5. Line of sight WiFi RF transmission (in open air): 20meter (80 feet)
17.Maintenance
1.Clean the rain gauge of Integrated Outdoor Transmitter once every 3 months.
Unscrew the rain collector funnel by turning it 30°counter clockwise.
Gently remove the rain collector funnel.
Clean and remove any debris or insects.
Install the collector funnel after it has been cleaned and completely dried.
Figure 52
2. Replace the wind, rain and thermo-hygrometer transmitter batteries once every 1-2 years
18. Troubleshooting Guide.
Problem Solution