User's Manual

Once registered, you receive a station ID and password. Make a note of this. You will need to enter it into your
weather station web interface shown in Figure 25 (Figure 20 is an example and your station ID and password
will be different.
Figure 20
Note: Your station ID will have the form: KSSCCCC###, where K is for USA station (I for international), SS is
your state, CCCC is your city and ### is the station number in that city.
In the example above, KAZPHOEN424 is in the USA (K), State of Arizona (AZ), City of Phoenix (PHOEN) and
#424.
13. WiFi Setup
13.1. When you first power up(AC) the console(when never setting WAP), or press and hold the
MIN/MAX/-(WiFi) button for three seconds in normal mode, the console icon(in front of the indoor temperature)
will flash to signify that it has entered WAP (wireless access point) mode, and is ready to enter for
WIFI settings.
13.2. Use your smart phone, tablet, or computer to connect to the console through WiFi.
Note that when the console programming is complete, you will resume your default WiFi connection.
Note that you cannot connect two or more devices at the same time when WAP mode.
13.2.1:Example 1: Connect to the console WiFi server with a PC.
Choose WiFi network settings from Windows (or search “Change Wi-Fi Settings” from Windows), and Connect
to the WeatherHome------ WiFi network, as shown in Figure 21 (your WiFi network name may be slightly
different, but will always begin with WeatherHome -).