User guide

Fig.7/3
Fig.7/4
Fig.7/5
Fig.7/1
Fig.7/2
36
FORCE 2
1
6
2 3 4
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Dirt container locking button
Carry handle
Auto cord rewind
On/off button
Post-motor filter
Wheel
Dirt container
Dirt container handle
11
9
8
12
7
10
13 14
15
Fig.2/1
Fig.2/2
Dirt container safety latch
Telescopic tube
Combination floor head
Dusting brush
Crevice tool
Upholstery tool
Flexible hose
2. Parts Overview
The central filters, may then be wiped with a
damp cloth to remove dirt residue. Allow to
air dry completely for at least 24 hours before
replacing back in the dirt container bin lid and
using the vacuum cleaner.
Cleaning the Pre-motor Filter
Remove the dirt container as previously
directed.
Remove the filters as shown (Fig.7/3).
To remove the central filters, rotate the filters
anticlockwise and pull away from the dirt
container lid (Fig.7/2).
Cleaning the Post Motor Filter
NOTE: This is located at the rear of the
vacuum cleaner.
Release the post-motor cover by pressing in
the catch at the top of the cover (Fig.7/5).
Fig.7/3
Fig.7/4
Fig.7/5
The HEPA pre-motor filter, foam filter and
frame may be rinsed in luke warm water max
(40°C). Allow to air dry for at least 24 hours
before replacing (Fig.7/4).
Return the pre-motor and foam filter to the
unit before replacing the dirt container.
Fig.7/6
The post-motor filter can be removed from
the unit and may be rinsed in luke warm
water max (40°C). Allow to air dry for at least
24 hours before replacing (Fig.7/6).
Replace the post-motor filter back in the case
and return to the vacuum cleaner.
Replacement Filters
Replacement filters are available from your
Vax stockist or Vax direct. Phone VAXCARE
or visit www.vax.com.au
8. Storage
IMPORTANT: Always unplug the vacuum
cleaner from the electrical outlet and rewind
the power cord as directed before storing.
NOTE: Always store the vacuum cleaner
base down.
Force 2 VCC-05 User Guide.indd 3 12/9/07 8:42:13 AM