Troubleshooting guide

installed (Section 5.3).

2. Remove the memory expansion board, if installed (Section 5.6).

3. On the rear of the computer, use a 3/16 hex socket wrench to remove the

six screw locks (Figure 5-43).

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

The computer becomes top-heavy when the keyboard assembly is removed and

the display is opened. To prevent damage to the display and the computer,

ensure that the display assembly is opened at a 90-degree angle.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

4. Remove the keyboard assembly (Section 5.7).

5. Remove the hard drive (Section 5.9).

6. Remove the integrated trackball assembly (Section 5.11).

7. Remove the diskette drive (Section 5.12).

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

The ZIF connector and its attached cable can be damaged easily. Handle only

the connector slide when disconnectin

the ZIF connector. Never

ull or