Technical data

SET CONFIGURATION SNMP
/COMMUNITY="name"
/NOCOMMUNITY="name"
Optional. Default: To enable the standard "public" community, you can run the
TCPIP$CONFIG procedure.
Used with the /ADDRESS qualifier. Name of the community that the SNMP
agent recognizes. Optionally, specify a type of access and a list of host addresses.
Enclose the name in quotation marks to preserve lowercase characters. See the
/TYPE and /ADDRESS qualifiers for more information.
[NO]COMMUNITY="name" removes a community name.
/CONFIRM
/NOCONFIRM
Optional. Default: /CONFIRM with if you use a wildcard; otherwise,
/NOCONFIRM
When you delete communities (with the /NOCOMMUNITY qualifier), first asks
for your confirmation.
If you specify the /NOCONFIRM qualifier, the operation is performed without
asking you to confirm the request.
/CONTACT=name
Optional. Default: None.
Name of the system administrator (or other contact person) of the host on which
the SNMP agent runs. The name field has a maximum length of 235.
/FLAGS=options
Optional.
The options include:
• SETS
Lets the master agent process SET commands from SNMP clients.
• AUTHEN_TRAPS
Lets the master agent send trap messages in response to unauthorized
community strings from SNMP clients.
/LOCATION=options
Optional. Default: None.
Location of the system on which the SNMP agent runs. Maximum total length is
215 characters.
The options include:
• [NO]FIRST=text
Specifies the first part of the location. Maximum length of text is 200
characters.
• [NO]SECOND=text
Specifies the last part of the location. Maximum length of text is 200
characters.
Command Descriptions 2–115