User guide

Compaq StorageWorks RAID Array 4000 User Guide
After all hardware components are installed and the unit is in place, the power
can be connected.
1. Plug the AC power cord into the RA4000. The power supply
automatically senses the input voltage. It is not necessary to select the
correct main voltage.
TROJ011.EPS
Figure 2-15. Connecting the power cord
To reduce the risk of electric shock or damage to the equipment:
■ Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
■ Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
■ Disconnect power from the storage system by unplugging all power cords
from either the electrical outlet or storage system.
2. Plug the power cord into a nearby, grounded outlet.
3. If a Redundant Power Supply has been installed, plug its AC power cord
into the power supply and then into a grounded outlet.
This completes the hardware installation of the Compaq StorageWorks
RAID 4000.