- Enterasys Security Router User's Guide

VPN MIB Tables
B-14 XSR SNMP Proprietary and Associated Standard MIBs
etsysVpnIkeProposal Table
This table contains the IKE proposals used during IKE negotiation. The named row is equivalent
to the
crypto isakmp proposal CLI command. The table index is {etsysVpnIkePropName}, which
is the name referenced in the etsysVpnIkePeerProposalsTable.
etsysVpnIpsecPolicy Table
This read-only table lists the IPSec policy names on the XSR. This table includes those policies
configured by means other than this MIB or CLI (that is, EZ-IPSec). The table index is
{etsysVpnIpsecPolicyName}. These policy names are used as values for etsysVpnIntfPolicyName
when applying policy to an interface.
etsysVpnIntfPolicy Table
This table applies IPSec policy to an interface. The table index is {ifIndex} from the mib-2 ifTable.
etsysVpnIkePeerPropName A proposal name from the etsysVpnIkeProposalTable. This object must
be used to create the row.
etsysVpnIkePeerPropRowStatus Acceptable values: active(1) and destroy(6). You cannot use this object
to create a row since the proposal name is needed first.
Table B-31 etsysVpnIkePeerProposalsTable (continued)
Field Description
Table B-32 etsysVpnIkeProposalTable
Field Description
etsysVpnIkePropName The index of the table.
etsysVpnIkePropEncryptAlgorithm Acceptable values are desCbc(1), tripleDesCbc(5), and aesCbc(7).
When used to create a row, all other values are defaulted.
etsysVpnIkePropHashAlgorithm Acceptable values are md5(1) and sha(2). When used to create a
row, all other values are defaulted.
etsysVpnIkePropDhGroup Acceptable values: modp768(1), modp1024(2) and modp1536(5).
When used to create a row, all other values are defaulted.
etsysVpnIkePropAuthMethod Acceptable values are preSharedKey(1) and rsaSignatures(3).
When used to create a row, all other values are defaulted.
etsysVpnIkePropMaxLifetimeSecs Acceptable values are 300-8640000. Default value is 28800. When
used to create a row all other values are defaulted.
etsysVpnIkePropMaxLifetimeKB Since the CLI does not allow this to be set, the XSR will implement
this as read-only.
etsysVpnIkePropRowStatus Acceptable values are active(1), createAndGo(4) and destroy(6).
When used to create a row, all values are defaulted.
Table B-33 etsysVpnIpsecPolicyTable
Field Description
etsysVpnIpsecPolicyName The name of an IPSec policy.