Command Reference Guide

The -passwd password option sets the password that will be used for logging

in to SMI-S EVA provider. If you omit this parameter, the command will ask for

a password interactively.

-ompasswd {-remove hostname | -delete hostname}

Removes a system with SMI-S EVA provider installed (together with the login and

port number information), which has a name hostname, from the SMISDB. The

–delete option is only an alias for –remove.

Used together with the -port port option, the command will only remove the

entries for the specified port. Use this option if you have more than one port

configured on the same system, and you want to delete only one port from the

configuration.

If the -user username option is specified, the command will only remove the

entries for the specified user. Use this option if you have more than one user

configured on the same system, and you want to delete only one user from the

configuration.

-ompasswd -list hostname

Lists all systems that have SMI-S EVA provider installed, together with the port

numbers, on which SMI-S EVA providers listen to requests. The hostname value

is optional: if you enter a name of the host, only the SMI-S CIMOMs, configured

for a specified host, will be displayed.

Note that you will get the same output if you run the omnidbsmis -ompasswd

command without the -list parameter.

-ompasswd -check [—host hostname]

Checks if the SMI-S CIMOMs were configured properly in the Application

Recovery Manager cell. It performs a health check of your environment, which

may help identify such potential problems as wrong user name or password

provided, a broken network connection, a DNS resolution problem, and so on.

The -host option is optional: if you enter a name of the host, the command will

be run on the specified host, otherwise it will be run on the local host. Note that

HP StorageWorks SMI-S Agent must be installed on the specified host.

-dgrules -init

Creates a template disk group pairs configuration file or overwrites an old one

with the new template. Note that only configured disk group pair rules are

overwritten.

-dgrules -put filename

Sets the EVA disk group pairs configuration file by reading the contents of the

input file, checking its syntax, and uploading the file to the SMISDB. If the syntax

of the file is inaccurate, the file is not uploaded.

-dgrules -get filename