HP 3PAR Management Console 4.5.1 Software User Guide

Path Summary Tab
The following information is provided on the Path Summary tab:
DescriptionColumn
The exported LUN value.LUN
The exported volume.Virtual Volume
The name of the host to which the VLUN is exported.Host
The number of host ports.Host Ports
WWNs reported by the host, but not visible to the system.Inactive Ports
The number of system ports that can see the host.Storage Systems Ports
The total number of available distinct paths between the host and the system.Available Paths
The number of paths seen by the system and reported "good" by the host.Healthy Paths
The multipathing method in use.Multipath
The failed path monitoring method.Failed Path Policy
The monitoring interval in seconds after which the host checks for failed paths.Monitoring Interval
The device name for the selected VLUN on the host.Host Device Name
Viewing Unassigned Paths
To view unassigned host paths:
1. In the Manager Pane, select Hosts.
2. In the Management tree, select Unassigned under the Paths node of the system that contains
the unassigned host paths you want to view.
Viewing Paths 111