HP 3PAR OS 3.1.3 Command Line Interface Reference

setdomain
DESCRIPTION
The setdomain command sets the parameters and modifies the properties of a domain.
SYNTAX
setdomain [options <arg>] <domain_name>
AUTHORITY
• Super
• Any role granted the domain_set right.
NOTE: You need access to all domains in order to run this command.
OPTIONS
-name <name>
Changes the name of the domain.
-comment <comment>
Specifies comments or additional information for the domain. The comment can be up to 511
characters long and must be enclosed in quotation marks. Unprintable characters are not allowed
within the <comment> specifier.
-vvretentiontimemax <value>[h|H|d|D]
Specifies the maximum value that can be set for the retention time of a volume in this domain.
<time> is a positive integer value and in the range of 0 - 43,800 hours (1,825 days). Time can
be optionally specified in days or hours providing either d or D for day and h or H for hours
following the entered time value.
To remove the maximum volume retention time for the domain, enter -vvretentiontimemax
" ". As the result, the maximum volume retention time for the system is used instead.
To disable setting the volume retention time in the domain, enter 0 for <time>.
SPECIFIERS
<domain_name>
Indicates the name of the domain.
RESTRICTIONS
You need access to all domains to run this command.
EXAMPLES
In the following example, the name of a domain named Domain1 is changed to DomainX:
cli% setdomain -name DomainX Domain1
The following example displays the addition of a comment to the domain Engineering:
cli% setdomain -comment “This is a comment for engineering.” Engineering
setdomain 281