HP 3PAR OS 3.1.3 Command Line Interface Reference

settemplate
DESCRIPTION
The settemplate command modifies the properties of existing templates.
SYNTAX
settemplate <option_value>... [option <arg>] <template_name>
AUTHORITY
• Super
• Any role granted the template_set right.
NOTE: You need access to all domains in order to run this command.
OPTIONS
-remove <option>...
Indicates that the option(s) that follow -remove are removed from the existing template. When
specifying an option for removal, do not specify the option’s value. For valid options, refer to
“createtemplate” (page 133).
SPECIFIERS
<option_value>...
Indicates the specified options and their values (if any) are added to an existing template. The
specified option replaces the existing option in the template. For valid options, refer to
“createtemplate” (page 133).
<template_name>
Specifies the name of the template to be modified, using up to 31 characters.
RESTRICTIONS
• Access to all domains is required to run this command.
• The -desc option cannot be removed from a template (it can be changed to an empty
string).
• The -nrw and -nro options cannot be removed from a template. These options can only
be replaced by specifying either -nrw or -nro before the -remove option.
EXAMPLES
• The following example displays template vvtemp1 modified to support the availability of
data should a drive magazine fail (mag) using the stale_ss policy:
cli% settemplate –ha mag –pol stale_ss vvetemp1
• In the following example, the -nrw and -ha mag options are added to the template
template1, and the -t option is removed:
cli% settemplate -nrw -ha mag -remove -t template1
328 Set Commands