HP 3PAR OS 3.1.3 Command Line Interface Reference

EXAMPLES
The following example specifies that remote-copy volume group Group1 should be synchronized
with its corresponding secondary volume group:
# syncrcopy Group1
Synchronization request issued for group Group1
The following example specifies that all remote-copy volume groups that start with the name
testgroup should be synchronized with their corresponding secondary volume group:
# syncrcopy -pat testgroup*
NOTES
• Mode (synchronous or asynchronous periodic) is set using the creatercopygroup command.
• For information about setting targets, see the creatercopytarget command.
648 Sync Command