HP 3PAR OS 3.1.3 Command Line Interface Reference

SPECIFIERS
<IP_address>
Indicates the IP address of the iSCSI target.
<netmask>
Indicates the IP netmask of the iSCSI target.
<gw_address>
Indicates the IP address of the gateway.
<mtusz_bytes>
Indicates the MTU size in bytes.
<isns_primary>
Indicates the IP address of the primary iSNS server.
<isns_secondary>
Indicates the IP address of the secondary iSNS server.
<isns_port>
Returns the TCP port number of the iSNS server. The default port number is 3205.
<count>
Indicates the number of ping packets to send. If a value is specified, it should be an integer from
1 through 64. If a value is not specified, the default is one packet.
<node:slot:port>
The physical location of the iSCSI target port.
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
In the following example, iSCSI port configuration is deleted:
cli% controliscsiport delete -f 104.64.98.1
NOTES
None
84 Control Commands