Hitachi Dynamic Link Manager Software Users Guide for VMWare

Displays the status of paths managed by VMware vSphere. For details
on VMware vSphere path statuses, see Table 2-6 Correspondence
Between VMware vSphere and HDLM Path Statuses on page 2-18.
-t
Omits the title for each information item.
Example
The following example displays path information:
PROMPT>dlnkmgr view -path
Paths:000002 OnlinePaths:000002
PathStatus IO-Count IO-Errors
Online 42 0
PathID PathName
DskName iLU ChaPort Status Type IO-Count
IO-Errors DNum HDevName
000000 0002.0000.0000000000000000.0000 HITACHI .DF600F .
77010152 0191 0B Online Own 42 0 0
t10.HITACHI_770101520191
000001 0005.0000.0000000000000000.0000 HITACHI .DF600F .
77010152 0191 1B Online Non 0 0 0
t10.HITACHI_770101520191
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
To display path information, by selecting a display item
-path -item
When you specify the -path parameter together with the -item
parameter, the command only displays the items specified by the value of
the -item parameter.
When the value of the -item parameter is omitted, only the PathID and
the Status fields are displayed.
The following table lists the correspondence between the display items
that can be selected by using the -item parameter and the parameter
values that can be specified after the -item parameter.
Table 6-9 Correspondence between the items displayed by the dlnkmgr
view -path -item command and the values of the -item parameter
Items displayed by the dlnkmgr view
-path -item command
Values specified after the -item
parameter
PathID
#
None
PathName pn
DskName dn
iLU lu
Command Reference
6-35
Hitachi Dynamic Link Manager (for VMware®) User Guide