HP XP7 Continuous Access Synchronous for Mainframe Systems User Guide (TK911-96003)

6. Click Finish.
7. In the Confirm window, review the settings and enter a task name in the Task Name box.
8. Click Apply to save your settings in the system.
Forcibly deleting pairs
You forcibly delete a pair for the following reasons:
• A currently unpaired volume that was previously in a pair is unusable because previous pair
information is still in the volume.
• The pair cannot be connected to the secondary system because of a communication error. In
this case, delete the pair forcibly in both primary and the secondary systems.
Prerequisite information
• The volume must be unpaired.
Procedure 20 To forcibly delete a pair
1. In the Storage Systems tree, click Logical Device.
2. Click the LDEV tab, then select the pair to be forcibly deleted.
3. From the Actions menu, select Remote Replications > Force Delete Pairs (Cnt Ac-S Pairs).
4. In the Force Delete Pairs (Cnt Ac-S Pairs) window, ensure that the volume is in the Selected
LDEV table.
5. Click Apply.
Saving pair information to a text file
You can save pair status and other information to a tab-delimited TSV file.
Procedure 21 To save pair information
1. In the Remote Replication window, click More Actions > Export.
2. If necessary, follow instructions in online Help.
Forcibly deleting pairs 83