Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access XP P9000 for Linux B.01.00.00

# run the raidscan command on ftsys1a or ftsys2a that is connected to the

# remote XP array.

# The HORCM_LDEV parameters are used to describe

# stable LDEV# and Serial# as another way of HORCM_DEV used 'port#,Target-ID,LUN'.

# [Note]:

# This feature depends on the micro version of RAID or kind of RAID.

# <dev_group>

# This parameter is used to define the device group name for paired logical

# volumes. The device group name is used by all Raid Manager commands for

# accessing these paired logical volumes.

# <dev_name>

# This parameter is used to define the names of the paired logical volumes

# in the device group.

# <Serial#>

# This parameter is used to describe the Serial number of RAID box.

# <CU:LDEV(LDEV#)>

# This parameter is used to describe the LDEV number in the RAID box,

HORCM_LDEV

#dev_group dev_name Serial# CU:LDEV(LDEV#) MU#

pkgA pkgA_index 60095 01:04 0

pkgA pkgA_logs 60095 01:05 0

pkgB pkgB_d1 60095 01:06 0

pkgC pkgC_d1 60095 01:07 0

pkgD pkgD_d1 60095 01:08 0

HORCM_INST

#dev_group ip_address service

pkgA ftsys1 horcm0

pkgB ftsys1 horcm0

pkgC ftsys1 horcm0

pkgD ftsys1 horcm0

Sample RAID Manager configuration file for the Remote Command Device 67