Using the HP DTC Manager/UX

159
Other dtcdiag parameter definitions
13
-l loglevel Specifies the amount of information that is logged in the log file for this dtcdiag
execution. The default logfile is /var/opt/dtcmgr/log/dtcdiag.log. Specify
one of the following logging levels:
0 Log only startup and termination messages.
1 Log serious or fatal error messages (and those of level 0). This is the default.
2 Log warning and informational messages (plus the messages of level 1).
-L logfile Specifies an alternative file that dtcdiag should use to log status and error messages.
The default log file is /var/opt/dtcmgr/log/dtcdiag.log.
Object parameter
Specify the object to be diagnosed with these parameters given in the order
specified:
dtcs The names of the DTCs on which a task is to be performed.
A DTC name must be specified. The asterisk metacharacter (*) can be used to
represent any string of characters for this parameter and it normally needs to be
escaped. For example, if the DTC names are DTC1, DTC2 and DTC3, the dtcs
parameter can be DTC\* to mean all those DTCs.
If this parameter is given without boards or ports, then the action with boards
specified as C or L is taken.
Caution If the DTC name is C, L, or B, a conflict may occur when specifying many objects.
This occurs because these names are also used as the label for the CPU/LAN board
of a DTC 48 or a DTC 16 (C), the LAN board of a DTC 72MX or a DTC 16TN (L),
and the ports of a DTC 16TN (B), respectively. To resolve this conflict, if the name
of a DTC is C, L, or B, then any such character found in the object of the command
line will be understood as that DTC name.
boards The name of the DTC boards on which the task is done.
This parameter is optional. Board names are:
C or c the CPU/LAN on a DTC 48 or DTC 16
L or l the LAN on a DTC 72MX or DTC 16TN