Using the HP DTC Manager/UX

Other dtcdiag parameter deﬁnitions

B or b all ports on a DTC 16TN (a DTC 16TN does not have

a separate board)

0 ... 5 the boards on a DTC 48

0,1 the boards on a DTC 16

0 ... 3 for the boards or LAN board on a DTC 72MX.

The asterisk metacharacter (*) can be used to represent all non-CPU/LAN or non-

LAN boards on a DTC and it normally needs to be escaped. For example,

dtcdiag -r DTC\* \*

Additionally, a range of non-CPU/LAN or non-LAN boards can be speciﬁed by

separating the number of the boards by a hyphen (-). For example,

dtcdiag -r DTC1 0-1

ports The number of the ports on which a task is to be performed. This parameter is

optional. Port numbers are:

0 ... 7 for direct connect boards on a DTC 48 or DTC 16

0 ... 5 for modem boards on a DTC 48 or DTC 16

0 ... 23 for a 24 port MUX board on a DTC 72MX

0 ... 15 for the ports on a DTC 16TN

The asterisk metacharacter (*) can be used to represent all ports on a board of a DTC

and it normally needs to be escaped. Additionally, a range of ports can be speciﬁed

by separating the number of the ports by a hyphen (-). For example, 0-7 could be a

range.

Values returned by dtcdiag or one of its synonyms

One of the following values is returned when a dtcdiag command is executed. To

display the return value, use the HP-UX echo command after the dtcdiag command.

0 No error or no test failures.

1 Command usage incorrect.

2 Error during startup or shutdown.

3 Fatal error during execution of the command.