HP Matrix Operating Environment 7.3 and 7.3 Update 1 Infrastructure Orchestration User Guide

For example, the template might specify a Windows 2008 OS image, but the user can customize
to Windows 2012 (with a cost increase of 1.00) or customize to Linux (with a cost decrease of
2.00). Similarly, the template might specify a cost of 1 per IP address for DHCP, but if the IP
Assignment type is changed to Static the cost is increased by 1 (to 2 per IP address); or if the
network is changed to 26_net, there is a reduction of 0.25.
Specifying per-unit costs for resources
In infrastructure orchestration designer, right click on the server group to display the Config tab,
where you can enter costs per number of servers in the server group, processors per server, and
memory size.
Costs for a server in an IO template is split into three values:
Base Cost per Server Encompasses all of the costs for the server except CPU and
memory cost. It may include availability characteristics and
type characteristics (physical, virtual, cloud). This cost does
not change during the lifecycle of the server.
Cost per Processor Cost per CPU in the server. This cost pushes the server cost
up and down during the lifecycle of the server based on the
changes performed by the user. This allows the server cost to
be adjusted together with the server configuration.
Cost per Unit of Memory Cost per unit of memory in the server. Server cost is also
updated for changes to the server configuration based on the
memory amount assigned to the server.
The Total Cost per Server is calculated as follows:
Total Cost per Server = Base Cost + (CPU cost per unit * CPU units) + (Memory cost per unit *
Memory units)
156 Matrix infrastructure orchestration provisioning and allocation