HP Virtual Connect Manager Command Line Interface Version 3.00 User for Integrity BL8x0c i2 Server Blades Guide

Command line 52
Item Description
->reboot server enc0:1
Reboots a specific multi-blade server that occupies bayes 1-4 of the primary
enclosure
Item Description
show server
Display all servers in the domain.
Syntax
show server <ServerID|*>
Parameter
ServerID
(optional)
The reference ID of a server in the domain. The format of the server ID is
<EnclosureID:Bay>. If the EnclosureID is not provided, then the primary or
local enclosure is used by default.
For a multi-blade server, the ServerID must be that of the monarch bay. This is
the ID shown in the summary listing.
Examples
->show server
Displays a summary listing of all servers
->show server *
Displays detailed information for all servers
->show server enc2:*
Displays detailed information for all servers in a specific enclosure
->show server enc0:4
Displays detailed information for the specific server in device bay 4 of an
enclosure named "MyEnclosure"
->show server enc0:5
Displays detailed information for a specific multi-blade server that occupies bays
5-8 of the primary enclosure
serverid
Manage virtual Server ID configuration settings.
Supported actions: help, set, show
Item Description
set serverid
Modifiy Virtual Server ID domain settings. The serial number attributes can be
changed only in one of the following scenarios:
•
Virtual Server ID source is Factory-Default.
•
Virtual Server ID source is VC-Defined or User-Defined, but no profiles are
using server IDs from this source.
•
Virtual Server ID source is User-Defined, and this range is being extended
by lowering the start or increasing the end values.
Syntax
set serverid Type=Factory-Default
set serverid Type=VC-Defined [PoolID=<1-64>]
set serverid Type=User-Defined Start=VCX01nnnnn
End=VCX01nnnnn
Properties