DisplayMaker Legacy ColorMark+ - User Guide

4-6 Editing Profiles
7. Set the Gamut Boundary.
For ColorMark format (.CX) profiles, this option allows you
to change the shape of the boundary surface of the gamut.
This parameter affects the transitions between adjacent col-
ors in the gamut, as well as between high chroma and low
chroma values within hues. By lowering the gamut face
length, you can eliminate the presence of “hard dots” of one
color in an adjacent color. If you lower this number too
much, however, you could reduce the size of the profile’s
gamut, which could result in inaccurate printed colors.
For ColorSpan media, the default value should work well in
most situations. For third-party media, you may have to
experiment with different values to get the best results.
Fig. 4-4. Gamut Boundary properties