Hitachi Dynamic Link Manager Software Users Guide for Linux

The following example shows how to filter and display the information on
all paths that pass through the CHA port 0A of the Thunder 9500V series:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path -stname | grep
9500V | grep 0A
The above command will display information pertaining to only those
paths that pass through the specified CHA port.
set (Sets Up the Operating Environment)
The dlnkmgr command's set operation sets the HDLM operating
environment.
Format
To Set Up the HDLM Operating Environment
/opt/DynamicLinkManager/bin/dlnkmgr set
{-lb {on [-lbtype {rr|exrr|lio|exlio|lbk|exlbk}]|off}
|-ellv error-log-collection-level
|-elfs error-log-file-size
|-elfn number-of-error-log-files
|-systflv trace-level
|-systfs trace-file-size
|-systfn number-of-trace-files
|-pchk {on [-intvl checking-interval]|off}
|-afb {on [-intvl checking-interval]|off}
|-iem {on [-intvl error-monitoring-interval] [-iemnum number-
of-times-error-is-to-occur]|off}
|-lic
|-audlog {on [-audlv audit-log-data-collection-level] [-
category [[ss] [a] [ca]|all]]|off}
|-audfac facility-value
|-lbpathusetimes number-of-path-use-times
|-expathusetimes number-of-path-use-times
|-dpc {on|off} [-pathid path-ID -lu|-pathid path-ID -storage]
|-dpcintvl checking-interval
|-pstv {on|off}
}
[-s]
To Display the Format of the Set Operation
/opt/DynamicLinkManager/bin/dlnkmgr set -help
Command Reference
6-15
Hitachi Dynamic Link Manager (for Linux®) User Guide