Hitachi Dynamic Link Manager Software Users Guide for Linux

Items displayed by the dlnkmgr view
-lu -item command
Values specified after the -item
parameter
Org-Product ha
Org-SerialNumber ha
Org-iLU ha
HaStat hastat
All items are displayed
all
For details on the contents of each displayed item, see Table 6-18 LU
Information on page 6-60.
The sub-parameters are:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see
Table
6-10 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-29 in
Parameters on page 6-16.
-hdev host-device-name|-pathid AutoPATH_ID
Displays information only for the paths accessing the specified host
device, if the -hdev parameter is specified.
Specify the name of the logical device file (minus the partition
number), /dev/sddlm[aa-pap], for the HDLM device. For details on
logical device files for HDLM devices, see
Logical Device Files for
HDLM Devices on page 2-11.
If the -pathid parameter is specified, only information about the LU
connected to the path with the specified AutoPATH_ID is displayed.
-t
Omits the title for each information item.
Example 1
The following example shows how to display LU information by using
iLUs as a sorting key, and selecting the items to be displayed. Execute
the following command to display SLPR, PathName, ChaPort, CLPR,
Type, IO-Count, IO-Errors, DNum, IEP, and HCTL:
Command Reference
6-57
Hitachi Dynamic Link Manager (for Linux®) User Guide