Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
execute the HDLM command with
the -hapath parameter specified.
KAPL01172-I There are no Online(S)/
Online(D) paths among the
target paths.
Details
An online operation was executed
using the -hapath parameter, but
there are no paths with the
Online(S)/Online(D) status
among the specified paths.
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the status of the path.
KAPL01173-W The target CHA port was
constructed from multiple
physical CHA ports. Operation
name = aa...aa. Specify a
physical CHA port by using the
"-cha -pathid" parameter.
Details
In an environment where storage
systems are virtualized, when you
specify a CHA port by using the -
chaid parameter of the offline or
online operation, the CHA port
might be constructed from
multiple CHA ports of the physical
storage system. In such a case,
you cannot execute the offline or
online operation with the -chaid
parameter specified.
aa...aa: offline or Online
Action
Specify a physical CHA port by
using the -cha -pathid
parameter, and then re-execute
the offline or online operation.
KAPL01174-W If the Physical Storage View is
disabled, the parameter value
aa...aa cannot be specified for
the -item parameter.
Details
If the Physical Storage View is
disabled, the parameter value
shown cannot be specified.
aa...aa: virt
Action
When specifying virtual storage
information as a display item,
enable the Physical Storage View.
KAPL01175-W If the Physical Storage View is
enabled, the parameter value
aa...aa cannot be specified for
the -item parameter.
Details
If the Physical Storage View is
enabled, the parameter value
shown cannot be specified.
aa...aa: phys, vid, ha, or hastat
Action
When specifying physical storage
information as a display item,
disable the Physical Storage View.
Messages
8-29
Hitachi Dynamic Link Manager (for Linux®) User Guide