HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

DescriptionAttribute
Total size of the open logical units and the intermediate logical units that satisfy
all the following conditions (in KB):
• Paths are not assigned.
• Paths cannot be assigned by using Device Manager.
• The logical unit is a real volume that has physical capacity.
openReservedActual-
Capacity
Type of the parity group
For P9500, XP24000/XP20000, or XP12000/XP10000/SVS200, one of the
following values is output:
• -1: None
• 0: Normal parity group
• 1: External volume parity group
• 2: Snapshot V-VOL parity group
• 3: Thin Provisioning Software volume parity group
-1 is output for other storage systems.
type
Option information of the external parity group
For P9500, XP24000/XP20000, or XP12000/XP10000/SVS200, a 3-bit value
is converted to decimal and is output.
• Bit 0 (0x01): Whether or not the cache mode is enabled
• Bit 1 (0x02): Whether or not the I/O suppression mode is enabled
• Bit 2 (0x04): Whether or not the cache inflow control mode is enabled
For each of these bits, 1 means enabled and 0 means disabled. For example,
when the cache mode and the cache inflow control mode are enabled, 5 is output
as the value of the volumeType attribute.
-1 is output in other cases.
volumeType
Indicates whether the data that is stored in the parity group is encrypted.
For P9500 or XP24000/XP20000, one of the following values is output:
• 0: The data is not encrypted.
• 1: The data is encrypted.
-1 is output for other storage systems.
encrypted
CLI Reference Guide 303