Operating Environment Software User Manual

Error: [addVirtualSystemResources] : Failed to Add the VM's Resources.
Exception: Unable to add guest resources - Network device add failed.)
A message similar to the following also appears in the Integrity VM command.log
(/var/opt/hpvm/common/command.log): 09/01/11
10:40:38|ERROR|host|root|Invalid Ethernet MAC Address '0x00215A9B0004'
- Linkloop failure.
Activation of a logical server on an Integrity VM can fail when performing the following procedure:
1. Create and activate a logical server on an Integrity VM. The guest gets a MAC address
allocated from VCEM .
2. Reinstall the CMS, such as an upgrade. The Integrity VM guest remains installed.
3. Create and activate a new logical server on an an Integrity VM. The guest gets a MAC address
identical to the first guest because VCEM's allocation pool was reset during reinstallation.
NOTE: The hosts for the logical servers in Step 1 and Step 3 do not necessarily need to be
the same host.
Suggested action
To resolve this, import the existing guest and its MAC address is reserved by VCEM.
Moving a server blade configured as a VM Host to another server blade
A VM Host may be incorrectly put in the Rejected Target Host list with a hard exception of Device
is unavailable when attempting to activate a VM logical server. This can occur after moving
an Integrity VM Host from one Integrity server blade to another Integrity server blade using the
logical server management Move operation. Figure 26 displays the details.
Figure 26 Device is unavailable message
Moving a server blade configured as a VM Host to another server blade can fail when performing
the following procedure:
76 Troubleshooting