Command Reference Guide

2.5 NAME 26
2.5 NAME
fsedrive – Manage configuration of the FSE drives.
2.5.1 SYNOPSIS
fsedrive {–a | – –add} ConfigFileName
fsedrive {–r | – –remove} Name [–F | ––force]
fsedrive {–s | – –show} Name [RevisionNumber | {–H | – –history}]
fsedrive {–m | – –modify} Name ConfigFileName
fsedrive {–l | – –list} [–D | – –detail]
fsedrive ––disable Name [–F | – –force]
fsedrive ––enable Name
fsedrive {–h | – –help}
fsedrive {–v | – –version}
2.5.2 DESCRIPTION
This FSE command manages configuration of the FSE drives. It is used to perform
these FSE administrator’s tasks:
• configure a new or remove an existing FSE drive,
• retrieve the configuration of an existing FSE drive,
• reconfigure an existing FSE drive,
• list configured drives in the FSE installation,
• disable or enable operation of an FSE drive.
Each FSE command communicates with the FSE system components through the
Management Interface (fse–mif). To execute an FSE command, the Management
Interface must be running. If the connection to the Management Interface fails,
File System Extender 3.2 Command Line Reference