User Manual

25
programmed in the vehicle. You will need to select each option again, even if you aren’t making a change
from the current setting.
PRESET TUNE
To flash a previously saved tune, use the buttons to the right of the screen to highlight Preset Tune. Press the
‘Select’ button to bring up a list of preset tunes.
Use the buttons to the right of the screen to highlight a Preset Tune, and press ‘Select’.
Use the buttons to the right of the screen to review the Preset Tune options.
Select ‘Change’ to make changes to the tuning options. Select ‘Accept’ to continue with programming.
SECTION 3: TECHNICAL INFORMATION & TROUBLESHOOTING
3-1: What To Do Before Taking The Vehicle In For Service
Return Vehicle To The Stock Programming.
When the vehicle is taken to a dealership or repair shop for any service, the vehicle’s computer must be returned
to the original stock calibrations, prior to taking the vehicle for service. To do this, follow the Back To Stock
instructions in Section 2. This allows the original factory calibrations to be transferred from their stored location