-
ENGLISH MONITOR CON RECEPTOR DE DVD MONITEUR AVEC RÉCEPTEUR DVD FRANÇAIS KW-AV70BT/KW-AV78BT ESPAÑOL MONITOR WITH DVD RECEIVER For canceling the display demonstration, see page 6. Para cancelar la demonstración en pantalla, consulte la página 6. Pour annuler la démonstration des affichages, référez-vous à la page 6. For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado.
-
ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.
-
Temperature inside the car... Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
-
ENGLISH Contents How to reset your unit ........................................... 3 How to forcibly eject a disc .................................... 3 Using other external components..........36 INTRODUCTIONS Listening to the SiriusXM™ Radio (only for KW-AV70BT) .....................37 AV-IN ................................................................... 36 Detaching/attaching the monitor panel...5 Initial settings .......................................6 Setting the clock .....................
-
ENGLISH INTRODUCTIONS Detaching/attaching the monitor panel Cautions • Hold the monitor panel securely so as not to drop it accidentally. • Fit the monitor panel onto the attaching plate until it is firmly locked. Detaching 1 3 On the source control screen: The monitor panel is unlocked. 2 Attaching plate • The attaching plate closes automatically about 10 seconds after the monitor panel is unlocked. The monitor panel opens by about 50°.
-
ENGLISH Initial settings When you power on the unit for the first time or reset the unit, the initial setting screen appears. • You can also change the settings on the screen. ( page 49) 2 Finish the procedure. 1 Language Select the text language used for on-screen information. ( page 51) AV Input Select an external component to play. ( page 50) screen is displayed. • is selected initially. Select the playback source.
-
1 Display screen. 4 Set the clock time. On the source control screen: To synchronize the clock time with FM RBDS 2 Display screen. To set the clock manually 3 1 Select the time display format 2 Adjust the hour 3 Adjust the minute 5 Finish the procedure.
-
ENGLISH Common operations • Turns on/off the power. ( below) • Displays screen. (Press) ( page 10) Remote sensor Monitor panel Motion sensor ( page 11) Turning on the power Screen (touch panel) Reset button ( page 3) Turning off the screen On screen: Turning off the power (Hold) Turning on/off the AV source The screen is turned off. You can activate the AV function by selecting source on screen.
-
Monitor panel operations — Open/Tilt To adjust the volume (00 to 50) 1 • On the source control screen, you can also adjust the volume by moving your finger on the touch panel as illustrated. Decrease 2 Increase To attenuate the sound The ATT indicator lights up. To cancel the attenuation, press [ On the source control screen: [ [ Open] Eject] [ Close] [ Tilt +] [ Tilt –] [Detach] ] again.
-
ENGLISH Switching screens Source control screen Common operating buttons [ ] *1 [ ]*2 [ ] [TP] [ screen Displays source control screen/settings screen and changes picture source. page 12 Displays the screen of App from connected iPod touch/iPhone. ( page 32) • Displays the phone control screen. (Press) • Switches to the last connected mobile phone. (Hold) ( page 56) Displays the sound adjustment screen. ( page 42) Activates/deactivates TA standby reception mode.
-
Selects the method to show the buttons and playback information. Motion Shows the buttons and playback information when you move your hand closer to the motion sensor. • The motion sensor does not work when the screen is turned off. ( page 8) Touch Shows the buttons and playback information when you touch the screen. Off Deactivates the or function.
-
ENGLISH AV SOURCE OPERATIONS Selecting the playback source KW-AV70BT KW-AV78BT TUNER ( page 13) Switches to the radio broadcast. Satellite*1 ( page 37) Switches to the SiriusXM™ radio broadcast. DISC ( page 17) Plays a disc. SD ( page 24) Plays files on an SD card. USB ( page 26) Plays files on a USB device. iPod ( page 28) Plays an iPod/iPhone. Pandora*1 ( page 34) Switches to the PANDORA® internet radio broadcast. Bluetooth ( page 62) Plays a Bluetooth audio player.
-
Preparation: Select the appropriate tuner channel interval for . ( page 15) DX/LO indicator ST/MO indicator Standby reception indicator Preset no. Band The station frequency currently tuned in/PS (station name) for FM RBDS when PS signal is coming in PTY code for FM RBDS Preset list page 16 • The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength. [P1] – [P6] [TP]* [3] [PTY ]* • Tunes in the preset station.
-
ENGLISH When an FM stereo broadcast is hard to receive... When the FM reception is interfered... 1 Activate monaural mode for better reception. 1 2 2 Auto On Off Activate monaural mode to improve FM reception, but the stereo effect will be lost. The MO indicator lights up. Wide Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will remain. Restore the stereo effect.
-
Changing the tuner channel interval Storing stations in memory Tuner channel interval changes depending on the area you use this unit. Automatic presetting—SSM (Strongstation Sequential Memory) (For FM only) 1 1 2 2 (Hold) US Local stations with the strongest signals are searched and stored automatically. Select this when using in North/ Central/South America. FM/AM intervals are set to 200 kHz/10 kHz. Manual presetting 1 Tune in to a station you want to preset.
-
Activating/deactivating TA Standby Reception ENGLISH Selecting a preset station TP indicator The following features are available only for FM RBDS stations. Searching for FM RBDS program— PTY Search You can search for your favorite programs being broadcast by selecting the PTY code for your favorite programs. 1 TP indicator TA Standby Reception Lights up The unit will temporarily switch to Traffic Announcement (TA) if available. Flashes Not yet activated.
-
Playing a disc • If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc. Inserting a disc To eject a disc 1 Open the monitor panel. 1 On the source control screen: On the source control screen: 2 Press [ Eject]. • You can eject a disc when playing another AV source. • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust.
-
ENGLISH Playable disc types Disc type Recording format, file type, etc. DVD • DTS sound cannot be reproduced or emitted from this unit.
-
To select the method to display the source control screen, page 11. • The operation buttons disappear when no operation is done for about 10 seconds. For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG Audio format Playback mode ( page 22) Media type Playing time DISC IN indicator page 9 Video format/ video playback mode—VIDEO/ VR-PRG (program)/ VR-PLAY (playlist)/ DivX/MPEG/PBC [7]*2 [ [ ]*3 ][ [6] *1 *2 *3 *4 *5 *6 *7 ]*4 Playback status (3: play / 8: pause / 7: stop) • DVD Video: Title no.
-
ENGLISH For CD/MP3/WMA/WAV Playback mode ( page 22) Audio format Playing time DISC IN indicator Media type Playback status (3: play / 8: pause ) page 9 • MP3/WMA/WAV: Folder no./Track no. • CD: Track no. While playing, the jacket picture is shown if the file has the tag data including the jacket picture. [ [ ]*1 ][ ] [6] Track/file information • Touching an information bar scrolls the text if not all of the text is shown. [4] [¢] Displays folder/track list. ( below) Selects playback mode.
-
[ ] [ ] [Menu] Selects the subtitle type. Selects view angle. Displays the disc menu (DVD)/playlist (DVD-VR). [Top Menu] Displays the disc menu (DVD)/original program (DVD-VR). Displays the menu/playlist/original [ ] program/scene selecting screen. ( below) Switches to the direct menu selection [ ] mode. Touch the target item to select. • To exit from the menu selecting ]. screen, press [ You can display the video menu screen while watching the playback pictures on the screen.
-
ENGLISH Only for VCD • To deactivate the PBC function, press [7] then the direct selecting buttons to select a track number. 1 Selecting playback mode For DVD/DVD-VR 2 Selects Repeat playback mode For VCD (without PBC)/CD/DivX/MPEG1/MPEG2/MP3/ WMA/WAV Selects Random playback mode* Selects Repeat playback mode* Direct selecting buttons ( below) [Zoom] [Aspect] [Adjust] [ ] [Return] [Menu] [ ] * You cannot activate the repeat mode and the random mode at the same time.
-
ENGLISH Settings for disc playback Disc Setup items Selectable setting/item Initial: Underlined Menu Language Select the initial disc menu language; Initial English ( page 69). Subtitle Select the initial subtitle language or erase the subtitle (Off). • Initial for KW-AV70BT: Off, for KW-AV78BT: English ( page 69) Down Mix When playing back a multi-channel disc, this setting affects the signals reproduced through the FRONT OUT/REAR OUT jacks.
-
ENGLISH SD operations Playing files in an SD card • This unit can play JPEG/MPEG1/MPEG2 */MP3/WMA/ WAV files stored in an SD card. • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • Make sure all important data has been backed up to avoid losing the data. 3 Close the monitor panel. * Except for MPEG2 files recorded by JVC Everio camcorder (extension code <.mod>). Inserting an SD card To eject the SD card 1 Open the monitor panel.
-
Playback mode ( below) Audio format Playing time Video format— MPEG/JPEG • MP3/WMA/WAV: Folder no./ Track no. • JPEG: Folder no./File no. While playing, the jacket picture is shown if the file has the tag data including the jacket picture. [ [ ] ] Playback status (3: play / 8: pause) Selects repeat playback mode. *1 *2 • SONGS: Repeats current track. FOLDER: Repeats all tracks of • the current folder. Selects random playback mode. *1 *2 • FOLDER: Randomly plays all tracks of the folder.
-
ENGLISH USB operations Playing a USB device • This unit can play JPEG/MPEG1/MPEG2 */MP3/WMA/ WAV files stored in a USB mass storage class device. • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • Make sure all important data has been backed up to avoid losing the data. Cautions: • This unit may not play back files in a USB device properly when using a USB extension cord.
-
Playback mode ( below) Audio format Playing time Video format— MPEG/JPEG • MP3/WMA/WAV: Folder no./ Track no. • JPEG: Folder no./File no. While playing, the jacket picture is shown if the file has the tag data including the jacket picture. [ [ ] [ ] ] Playback status (3: play / 8: pause) Track/file information (for MP3/ WMA/WAV) • Touching an information bar scrolls the text if not all of the text is shown.
-
ENGLISH Listening to the iPod/iPhone device • To use App of iPod touch/iPhone (such as MotionX-GPS Drive), page 32. • To listen to PANDORA® internet radio, page 34.
-
Select the unit controlling iPod/iPhone playback. Selecting preference settings for iPod/iPhone playback When the source is “iPod”... When the source is “iPod”... 1 1 2 2 Head Controls playback from this unit. ( page 30) iPod Controls audio/video playback from the iPod/iPhone. • Playback information is shown. iPod Out * Displays the menu and playback screen output from iPod/iPhone. ( page 31) • You can control playback from this unit in the same way as on the iPod/iPhone.
-
ENGLISH iPod/iPhone playback operations for
mode To select the method to display the source control screen, page 11. • The operation buttons disappear when no operation is done for about 10 seconds. • To change settings for video playback, page 46. • Select “iPod” as the source. ( page 12) • Make sure to select for . ( page 29) • When you turn on this unit, the iPod/iPhone is charged through the unit. Track no.
-
iPod/iPhone playback operations for mode 1 • Connect the iPod touch/iPhone using KS-U30 (separately purchased). ( Installation/Connection Manual) • Select for setting. ( page 28) • Make sure to select for . ( page 29) • Select “iPod” as the source. ( page 12) 2 Select the menu (Music or Video) (1), a category (2), then a desired item (3). • Select the item in the selected layer until a desired track starts playing.
-
ENGLISH Using an App of iPod touch/iPhone You can use an App of the connected iPod touch/iPhone on this unit. • You can operate some functions of an App on the touch panel. Preparation • Connect the iPod touch/iPhone using KS-U30 (separately purchased). ( Installation/Connection Manual) • Select for setting. ( page 28) • For Apps you can use on this unit, visit . • When you use an App of the iPod touch or iPhone, see also page 70 for safety instructions.
-
To view the screen of App 3 Select for setting On screen: ENGLISH on screen. or On source control screen: • When is set to , [Apps] button is shown on the screen, and [ ] button is shown on the source control screen. You can display the screen of App by pressing either button. ( below) • When is set to , setting is automatically changed and fixed to .
-
ENGLISH PANDORA® internet radio operations (only for KW-AV70BT) Preparation Install the latest version of the PANDORA® application on your iPhone. • Select “Pandora” as the source. ( page 12) • You can operate PANDORA using the remote controller (for KW-AV70BT: separately purchased). Only playing, pausing, and skipping are available. Station name/Playing time Playback status ( 3: play/8: pause) Song information • Touching an information bar scrolls the text if not all of the text is shown.
-
Selecting station from the Station List Appears when Quick Mix is activated (All songs in the registered stations are played randomly) The requirements for listening to Pandora are as follows: • Use an Apple iPhone or iPod touch running under iOS3 or later. • Search for “Pandora” in the Apple iTunes App Store to find and install the most current version of the Pandora® application on your device. • In the application on your device, log in and create an account with Pandora.
-
ENGLISH Using other external components To select the method to display the source control screen, page 11. • The operation buttons disappear when no operation is done for about 10 seconds. • To change settings for video playback, page 46. AV-IN name ( below) [ ] [–] [+] [Mode] [AV MENU] Adjusts the volume. Changes the AV-IN name. • Press [2] or [3] to select an AV-IN name. Displays screen. AV-IN You can connect an external component to the LINE IN/ VIDEO IN jacks.
-
Before operating, connect the SiriusXM tuner (not supplied) to the expansion port on the rear of the unit. ( Installation/Connection Manual) Everything worth listening to is on SiriusXM, getting over 130 channels, including the most commercial-free music, plus the best sports, news, talk and entertainment. To start listening to the SiriusXM™ Satellite Radio, A SiriusXM Vehicle Tuner (separately purchased) and Subscription are required. For more information, visits www.siriusxm.com.
-
Displaying the information of the current channel ENGLISH Selecting a preset channel Selecting a channel on the list 1 2 Select a category (1), then a channel (2) from the selected category. Hides the text information Current category Text information Scrolls the text information Current channel no./ channel name Storing channels in memory You can preset six channels for each band. 1 Tune in to a channel you want to preset. ( page 37) 2 Select a preset number.
-
Activating the parental lock Setting the parental lock 1 You can set the parental lock in order to, for example, restrict children from receiving adult channels. On screen: Setting the parental code • Initial setting is “0000.” • Changing the code does not change the and settings. 1 Display screen. 2 Enter your parental code number (1), then confirm the entry (2).
-
ENGLISH • To cancel the selection, select the locked channel again in Step 3. The icon disappears and the selection is canceled. • When you try to receive a channel with the parental lock activated, the parental code input screen appears and you cannot receive the channel until you enter the correct code. Skipping the unwanted channels If you do not want to receive some channels, you can skip them. Setting the channel skipping 1 Activate the channel skip.
-
You can enjoy the rear source playback on the external monitor connected to the VIDEO OUT and 2nd AUDIO OUT jacks, while listening to any source. • When you press [Same as Front] while listening to music, the track list appears. • If the selected source is other than “DISC”, “SD”, “USB”, or “iPod” or “AV-IN”, nothing appears on the rear monitor.
-
ENGLISH Sound adjustment Using the sound equalization • The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the adjustment is stored for each of the following categories. – DVD/DVD-VR/ VCD – CD – DivX/MPEG1/MPEG2/MP3/WMA/WAV • You cannot adjust the sound when the AV source is turned off. Selecting a preset sound mode 1 Storing your own adjustment On screen: Customizing preset sound mode 1 Select a sound mode.
-
Adjusting the crossover frequency 1 On screen: 2 Select a band. 2 3 Adjust the sound. 3 Select the item to adjust, then make adjustments. Adjusts the crossover for front or rear speakers (high pass filter). Reset Freq Q Bass SW Level Changes level of Low/Mid/ High to 0. Selects frequency. Adjusts the width of the frequency.*1 Activates/deactivates bass.*2 Adjusts subwoofer level. Adjusts the crossover for subwoofer (low pass filter).
-
ENGLISH Changing display design You can change the background, the color of text and touch panel buttons. 1 On screen: 2 Select/adjust the color 2 Color palette Dimmer setting: You can make selections for each dimmer setting—< > (Dimmer On) or < > (Dimmer Off) User color adjuster: You can make your own color adjustment and store it to Text/Buttons Select/adjust the color. (For details, above.) • On the button color selecting screen, you can select a color for touch panel buttons.
-
Using your favorite scene as the background 5 Capture the image displayed on the ENGLISH screen. While playing a video or JPEG, you can capture an image and use the captured image as a background. • You cannot capture copyrighted content and image from iPod/iPhone. • When using a JPEG file as the background, make sure that the resolution is 800 x 600 pixels. • The color of the captured image may look different from that of the actual scene. 1 Play back a video or JPEG. 2 Display screen.
-
ENGLISH Setting for video playback You can change the setting for video playback. 4 Adjust the picture (–15 to +15). Adjusting the picture You can adjust the picture quality. 1 Touch any position of the screen other Adjusts the brightness Adjusts the contrast Adjusts the blackness Adjusts the color Adjusts the tint * Adjusts the detail than operation buttons. * Adjustable only when the incoming signal is NTSC. 2 3 Select Dimmer On (< >) or Off (< >).
-
Zooming the picture You can change the aspect ratio for video playback. You can zoom the picture (, to ). • When is set to or ( the left column), the picture is zoomed with the aspect ratio of the setting. 1 Touch any position of the screen other than operation buttons. 1 Touch any position of the screen other than operation buttons.
-
ENGLISH Using a rear view camera • To use a rear view camera, the REVERSE GEAR SIGNAL lead connection is required. For connecting a rear view camera, Installation/Connection Manual. To display the picture from the rear view camera manually Activating the rear view camera 1 On screen: On screen: 2 To deactivate, select . When displaying the picture from the rear view camera manually, you can change the setting of the picture.
-
ENGLISH Setting menu items • When changing settings for , and setting in , turn off the AV source. For other settings, change them when the AV source is turned on. Menu item Fader/Balance Equalizer Audio Loudness Crossover Volume Adjust Amplifier Gain* Speaker Select Selectable setting/item Initial: Underlined Fader : Adjust the front and rear speaker output balance.
-
Menu item ENGLISH Dimmer Display Design OSD Clock Display Demonstration Scroll GUI Adjust NTSC/PAL Display Sensor Input AV Input*1*2 Selectable setting/item Initial: Underlined z Auto : Dims the screen and button illumination when you turn on the headlights. • The ILLUMI lead connection is required. ( Installation/Connection Manual) z On : Activates dimmer. z Off : Cancels. z Dimmer : Sets the Dimmer On ( )/Off ( ) times. Time Set • Press [5] or [∞] to set the time.
-
System Input Camera Input Selectable setting/item z On z Off Initial: Underlined : Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. : Cancels. Navigation Input Change the settings for displaying the screen of App from connected iPod touch/iPhone. ( page 32) • is not used for this unit. Language Select the text language used for on-screen information.
-
ENGLISH Memorizing/recalling the settings You can memorize the following settings: • Settings on screen: Fader/Balance, Equalizer, Loudness, Crossover (HPF/LPF/SW Level settings), Volume Adjust, Speaker Select, Dimmer, Display Design, Display Sensor, AV Input, Camera Input, Navigation • Settings for “AV-IN”: AV-IN Name Memorizing your settings Recalling your settings 1 • Turn off the AV source by pressing [AV Off] on and select “AV Off” as the rear source beforehand.
-
Adjusting the touch position You can update the system by connecting a USB device containing an update file. You can adjust the touch position on the touch panel if the position touched and the operation performed do not match. 1 Create an update file, copy it to a USB 1 device, and connect it to the unit. On screen: • To connect a USB device, page 26. 2 On screen: 2 Touch the center of the marks at the lower left and at the upper right as instructed.
-
ENGLISH BLUETOOTH OPERATIONS Information for using Bluetooth® devices • Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device. • This unit may not work for some Bluetooth devices. • Connecting condition may vary depending on circumstances around you. • For some Bluetooth devices, the device is disconnected when the unit is turned off.
-
Connecting a new Bluetooth device for the first time 2 Change the PIN code. • If you skip changing the PIN code, go to step 3. When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device. Pairing allows Bluetooth devices to communicate each other. To make pairing, you may need to enter the PIN (Personal Identification Number) code of your Bluetooth device you want to connect.
-
To disconnect ENGLISH Connecting/disconnecting a registered Bluetooth device 1 Display the Bluetooth setting screen. ( page 55) • For Bluetooth mobile phone: Phone setting screen • For Bluetooth audio player: screen 2 A confirmation message appears. Press [Yes]. Deleting a registered Bluetooth device To connect 1 On screen ( Step 2 on the left column): Select the device you want to connect. 2 Select a device to delete the registration. A confirmation message appears.
-
Receiving a call Adjusting the volume of calls/ earpiece/microphone When a call comes in... Status of the device/Battery reminder (only when the information comes from the device) While talking... Call information (if acquired) Adjusts the volume of calls/earpiece Adjusts the microphone volume • This adjustment does not affect the volume level of the other sources.
-
Direct number entry ENGLISH Making a call 1 Deletes last character On the source control screen: Hold: Adds “+” Presets the entered phone number on the preset list ( page 60) • You can also display the phone control screen by pressing [ Phone] on screen. • You can enter up to 32 numbers. Voice Dialing 2 Select a method to make a call. Direct number entry ( the right column) • Available only when the connected mobile phone has the voice recognition system.
-
Using the preset list/phone book/call lists 2 Select the initial. ENGLISH 1 [Preset] From preset list [ ] From dialled call list. [ ] From received call list. [ ] From missed call list. [ ] From phone book. • For copying the phone book, page 60. Displays the other letters 3 Select a phone number from the list.
-
Presetting the phone numbers Copying the phone book ENGLISH You can preset up to 6 phone numbers. 1 You can copy the phone book memory of a mobile phone into the unit (up to 400 entries). On the source control screen: 1 2 Select an item from phone book/call On the source control screen: 2 lists. 3 Select a phone number. (Hold) 4 Select a preset number to store. PIN code (initial: 0000) Numbers of the phone book entries copied 3 Operate the target mobile phone.
-
About mobile phones compatible with Phone Book Access Profile (PBAP) 1 Display the preset list/phone book/call If your mobile phone supports PBAP, the phone book and call lists are automatically copied to the unit when the mobile phone is connected. • Phone book: up to 5 000 entries • Dialled calls, received calls, and missed calls: up to 50 entries each list you want to delete.
-
ENGLISH Using the Bluetooth audio player • To register a new device, page 55. • To connect/disconnect a device, page 56. Status of the device/Battery reminder (only when the information comes Playback mode *1 ( below) Track no./Playing time *1 from the device) Playback status (3: play / 8: pause) *1 page 54 Tag data (current track title/artist name/album title) *1 • Touching an information bar scrolls the text if not all of the text is shown.
-
Mobile phone Bluetooth audio player On “BT Audio” source control screen: Menu items Selectable setting/item Initial: Underlined Connection z Connect z Disconnect PIN Code Changes the PIN code of the unit. • Touch the current PIN code, enter a new PIN code, then press [Save]. Device Name Shows the device name to be shown on the Bluetooth device—JVC Unit. : page 56 : page 56 Device Address Shows the MAC address of the unit. Phone Device*1 Shows the phone device name.
-
ENGLISH REFERENCE Using the remote controller For KW-AV70BT: To use the remote controller, purchase RM-RK252P separately. If the effectiveness of the remote controller decreases, replace the batteries. Installing the batteries R03/LR03/AAA Before using the remote controller: • Aim the remote controller directly at the remote sensor on the unit. • DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).
-
Operations VOL +/VOL – • Adjusts the volume level. • “2nd VOL” function does not work for this unit. SOURCE Selects the source. 6 Starts/pauses*2 playback. PHONE / Answers incoming calls. BAND / 7/ • • • • 0–9 ( page 66) • Enters a number while holding SHIFT. • “SETUP” function does not work for this unit. 1–6 Enters preset station number while holding SHIFT. ASPECT Changes the aspect ratio. • To check the current aspect ratio setting, operate on the touch panel.
-
ENGLISH Searching for an item directly Various disc operations Tuner frequency 1 Press DIRECT while holding SHIFT to enter the search mode. 2 Press number buttons while holding SHIFT to enter a frequency. • To erase a misentry, press CLR (clear) while holding SHIFT. 3 Press ENT to confirm the entry. Using the disc menu • DVD-Video/DVD-VR 1 For DVD Video, press TOP M or MENU. For DVD-VR, press...
-
Caution on cleaning the unit To keep discs clean Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. Recommended cleaning method: Gently wipe the panel with a soft, dry cloth. A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvents (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.
-
ENGLISH More about this unit Playing MP3/WMA/WAV files File playback • This unit can play back files with the extension code <.mp3>, <.wma>, or <.wav> (regardless of the letter case—upper/lower). • This unit can play back the files meeting the conditions below: – Bit rate: MP3/WMA: 32 kbps — 320 kbps – Sampling frequency: 48 kHz, 44.1 kHz, 32 kHz (for MPEG1) 24 kHz, 22.05 kHz, 16 kHz (for MPEG2) 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz (for WMA) 44.1 kHz (for WAV) • This unit can show ID3 Tag Version 1.0/1.
-
Through the analog terminals (Speaker out/REAR OUT/FRONT OUT) 2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.
-
ENGLISH • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other countries. • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
-
What appears to be trouble is not always serious. Check the following points before calling a service center. • For operations with the external components, refer also to the instructions supplied with the adapters used for the connections (as well as the instructions supplied with the external components). • Messages (enclosed in “ ”) in the tables below are shown in the language selected on ( page 51).
-
If there seems to be a problem General ENGLISH Symptom Remedy/Cause No sound comes out of the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. No picture is displayed on the screen. Turn on the screen. ( page 8) The unit does not work at all. Reset the unit. ( page 3) does not work properly. The display sensor may malfunction when an object exists close to the motion sensor. In this case, select for .
-
AV-IN iPod/iPhone Remedy/Cause “Now Reading...” keeps flashing on the screen. Turn off the power and on again. While playing a track, sound is sometimes interrupted. The tracks are not properly copied into the USB device or the SD card. Copy tracks again, and try again. No sound comes out of the speakers. • Disconnect the iPod, then connect it again. • Select another source, then reselect “iPod”. The iPod/iPhone does not turn on or does not work. • • • • Sound is distorted.
-
SiriusXM™ radio (only for KW-AV70BT) ENGLISH Symptom Remedy/Cause “No Signal” appears on the screen. Make sure the SiriusXM radio antenna is mounted outside the vehicle. Move vehicle to an area with a clear view of the sky. “Check Antenna” appears on the screen. • Check the SiriusXM radio antenna connection and make sure it is firmly attached to the tuner. • Check the SiriusXM radio antenna cable to see whether it is bent or broken. If the antenna cable is damaged, replace it.
-
Bluetooth Remedy/Cause Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth mobile phone. • Move the car to place where you can get a better signal reception. The sound is interrupted or skipped while using a Bluetooth audio player. • Reduce the distance between the unit and the Bluetooth audio player. • Disconnect the device connected for Bluetooth phone. • Turn off, then turn on the unit. • (When the sound is not yet restored) connect the player again.
-
ENGLISH Specifications Power Output 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal-to-Noise Ratio 80 dBA (reference: 1 W into 4 Ω) Load Impedance Frequencies Low: 60 Hz, 80 Hz, 100 Hz, 150 Hz Mid: 500 Hz, 1 kHz, 1.5 kHz, 2 kHz High: 10 kHz, 12.5 kHz, 15 kHz, 17.
-
FAT 32/16/12 Capacity 8 Mbytes to 32 Gbytes Data Transfer Rate Maximum 10 Mbps USB Standards USB 2.0 Full Speed Data Transfer Rate Full Speed Maximum 12 Mbps Low Speed Maximum 1.5 Mbps Compatible Device Mass storage class Compatible File System FAT 32/16/12 Max. Current DC 5 V Version Bluetooth 2.0 certified Output Power +4 dBm Max. (Power class 2) Service Area Within 10 m (10.9 yd) Profile HFP (Hands-Free Profile) 1.5 OPP (Object Push Profile) 1.
-
7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 The countries where you may use the Bluetooth® function (For KS-UBT1) Die Länder, in denen Sie die Bluetooth® Funktion verwenden können Pays où vous pouvez utiliser la fonction Bluetooth® De landen waar u de Bluetooth®-functie mag gebruiken Países en los que se puede utilizar la función Bluetooth® Paesi nei quali è possibile utilizzare la funzione Bluetooth® Länder där du kan använda Bluetooth®-funktionen Lande, hvor du kan bruge Bluetooth®-funktionen Land
-
Country Andorra Australia Österreich Bosna i Hercegovina Belgien Belgique България Brasil Canada Schweiz Suisse Chile Κύπρος Kıbrıs Česká republika Deutschland Danmark Eesti España Suomi Finland France United Kingdom Ελλάδα Hong Kong 香港 香港 Hrvatska Magyarország Indonesia Country Country Ireland Sverige Éireȯ ¡ȡȱ ] %OXHWRRWKp ȡ[ Singapore ȯ -¢ȡ ȡ `Ȫ India 新加坡 ȡ Singapura Slovenija Ísland Slovensko Italia 대한민국 Lichtenstein Türkiye Lietuva 台湾 Luxemburg United States of America Luxembourg
-
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.
-
KW-AV70BT/KW-AV78BT Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement LVT2300-002A [J/JW] 1211EHHMDWJEIN EN, SP, FR © 2011 JVC KENWOOD Corporation ENGLISH ESPAÑOL FRANÇAIS This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
-
INSTALLATION (IN-DASH MOUNTING) INSTALACIÓN INSTALLATION (MONTAJE EN EL TABLERO DE INSTRUMENTOS) (MONTAGE DANS LE TABLEAU DE BORD) The following illustration shows a typical installation. However, you should make adjustments corresponding to your specific car. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
-
Removing the unit Extracción de la unidad Retrait de l’appareil Before removing the unit, release the rear section. Antes de extraer la unidad, libere la sección trasera. Avant de retirer l’appareil, libérer la section arrière. 1 Detach the monitor panel (see page 5 of the INSTRUCTIONS). Desmonte el panel del monitor (consulte la página 5 del MANUAL DE INSTRUCCIONES). Détachez le panneau du moniteur (voir la page 5 du MANUEL D’INSTRUCTIONS). 2 3 Detach the trim plate.
-
ENGLISH ESPAÑOL FRANÇAIS Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. Antes de la conexión: Verifique atentamente el conexionado del vehículo. Una conexión incorrecta podría producir daños graves en la unidad.
-
B Connecting the external amplifiers and subwoofer / Conexión de los amplificadores y subwoofer / Connexion d’amplificateurs extérieurs et d’un caisson de grave You can connect an amplifier to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit. • Disconnect the speakers from this unit, and connect them to the amplifier. Leave the speaker leads of this unit unused.
-
D Connecting the microphone / Conexión de la unidad de micrófono / Connexion du microphone 2 1 3 Microphone Micrófono Microphone Secure the microphone cord using cord cramps (not supplied) if necessary. Adhesive tape Cinta adhesiva Ruban adhésif Si es necesario, asegure el cable del micrófono por medio de abrazaderas (no suministradas). Fixez si nécessaire le cordon du microphone en utilisant des serre-fils (non fournis).
-
KW-AV708T iPhone/iPod users: PLEASE READ THIS BEFORE USING YOUR NEW UNIT You have two options when connecting an iPhone or an iPod to your new unit: • Option 1 (Default Setting): Using the optional JVC KS-U30 Setting for iPod/iPhone playback Your unit is pre-set from the factory to allow • Make sure that"AV Off" is selected as the rear source. audio and video playback when you connect your iPhone or iPod using the optional JVC KS-U30 cable (Sold Separately).
-
KW-AV60BTIKW-AV60/KW-ADV64BT iPhone/iPod users: PLEASE READ THIS BEFORE USING YOUR NEW UNIT You have two options when connecting an iPhone or an iPod to your new unit: • Option 1 (Default Setting): Using the optional JVC KS-U30 Your unit is pre-set from the factory to allow audio and video playback when you connect your iPhone or iPod using the optional JVC KS-U30 cable (Sold Separately). If you purchased the KSU30, simply connect your iPhone or iPod using this optional cable.
-
.JVC 0 Bluetooth® KS-UBT1 USB Bluetooth Adapter I Adaptateur USB Bluetooth I Adaptador Bluetooth USB 1USB-Biuetooth-Adapter 1Adattatore USB per Bluetooth I Adaptador USB de Bluetooth I USB Bluetooth adapter I USB Bluetooth-adapter I USB-Biuetooth-adapter I USB Bluetooth -sovitin I USB Bluetooth Adaptor I USB-aAanrep Bluetooth I npoaap~Joyta~ Bluetooth USB I Adapter Bluetooth USB I USB Bluetooth adapter I USB Bluetooth Adapter I BluetoothaAanrep USB I Adaptor USB Bluetoolh I USB Bluetooth aAanrep I u~'Jii
-
Declaration of Conformity with regard to the R&TIE Directive1999/5/EC Manufacturer: JVC KENWOOD Corporation EU Representative's: JVC Technical Services Europe GmbH l -12 Moriyacho, Postfach 1005 04 Kanagawa-ku, Yokohama-shi, 61145 Friedberg f:;:~awa, lll-0022 Germany CE0984 English: Hereby, JVC KENWOOD, declares that this KS-UBTl is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Deutsch: Hiermit erklan JVC KENWOOD, d.
-
= )t Prodotti )t lnfonnazioni per gli utenti sullo smaltimento delle apparecchiature e batterie obsolete Questi simboli indicano che il prodotto e Ia batteria su rui essi appaiono non devono essere smaltiti tra i rifiuti domesticigenericiallafinedellalorovita utile. Qualora si desideri smaltire il prodotto e Ia batteria, effettuare lo smaltimento in conformit.i alia normativa nazionale applicabile o aile altre leggi della propria nazionee del proprio comune.
-
!E ii!!M -i Baterie lnformace oro uiivatele k likvldad stareho zaiizeni a baterii ]Pouze pro Evropskou unli] ....... - ~:a ~~~ll l l l l l l l l l l lllllllllllllllllllllllllllllllllllllllllllllllllllllllll~-·o~l~ol~~~••~,~,.~~fl~'~"~"'~"~,;~,~.•~B~Iu~etooth ~o.ii\.1.1JD~u11ffl Bluetooth SIG, Inc. LLii::m;liiL'fl~£l..:J"r11-11U~..:Jn~Tl1fluu71ffl JVC KENWOOD Corporation oomu\iim, ouqp•Hi••~•• j01lll'u\-ln>~H>~m><~hu,ri1>i'>~] Tyto symboly znamenajl, i.
-
JVC~. - Important Notice for Bluetooth Users It is recommended to check availability of the latest firmware updates at the following webpage before using this receiver. The latest firmware is posted on the webpage below: http ://s u pport.jvc. com/ Click on Software to view most current updates.
-
A CAUTION The Bluetooth adapter (KS-UBT1) is inserted in the unit· when shipped from the factory. When you remove the Blueto~th adapter (KS-UBT1) from the unit, store it in this bag. For removing the Bluetooth adapter (KS-UBT1 ), refer to the Instructions.
-
When it is not required to detach the front control panel from the main unit, use the provided screws to attach the ~~---~U control panel- to the main unit.
-
a: z w U)~Q ~ ::D ::::» ~ ~ ~ i en i= : 0 LL. w ::::» w !i al · c( ~ w ...J 0 S:! ~CAUTION • CONNECT BLACK WIRE ((l)GND) TO GROUND F:IRST. OTHERWISE, DAMAGE TO YOUR UNIT MAY OCCUR. INCORRECT CONNECTION CAUSES SERIOUS DAMAGE TO THIS UNIT PLEASE READ INSTALLATIONJCONNECnON MANUAL CAREFULLY. il-------------- -....----------- ------1 ~ ' ::i w : CONNECT OTHER WIRES CONNECT GROUND FIRST m .,_a:: -c (.) ..... t_),~~~ :E w (.) w ::::» 0 a:: .....
-
Please do not send products or other correspondence to this address. PLEASE PLACE STAMP HERE JVC AMERICAS CORP. 1700 Valley Road Wayne, NJ 07470 PO BOX 1189 BEDFORD, TX 76095-1189 11 ••• 1.11 .. 11 ••• 1.1 ••• 1.1 •••• 11 ••• 111 •• 1.1.1 •• 1.. 1.1.1 .. 1... 11 PRODUCT REGISTRATION CARD I QUESTIONNAIRE USA CUSTOMERS ONLY Registering your product will allow us to contact you in the unlikely event a product safety notification is required. This form is for Product Registration purposes only.
-
Register online at REGISTER.JVC.COM and receive a special offer! PRODUCT REGISTRATION First Name: Last Name: Address: Apt.
-
JVC CANADA ONLY CANADA SEULEMENT WARRANTY OWNER'S COPY OF WARRANTY CARD COPIE D'ENREGISTREMENT DE LA GARANTIE DU PROPRIETAIRE GARANt II (Save sales docket together with this warranty card, as a proof of date of purchase. La facture et cette garantie sont vos preuves de Ia date d 'achat; rangez-les.) MODEL . MODELE. ......... . Purchase from. Achete chez .................... . Dealer's Address . Adresse du Vendeur' No. No SERIAL NO. . .. .......... NO DE SERlE ..................... Date purchased .
-
(e) (f) (g) (h) (i) (j) (k) Any JVC products on which the serial num-ber has been defaced , modified or removed . Maintenance, cieaning or periodic check-up Conversion to foreign or domestic voltage or frequency. Any JVC product without the Canadian Electrical Safety Regulations ID. Any JVC products used for commercial or institutional , rental , or display purposes . Parts . ... .. 1 year (except video head - 90 days) Labour .. .
-
TO OUR VALUED CUSTOMER-THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. NEED HELP ON HOW TO HOOK UP? NEED ASSISTANCE ON HOW TO OPERATE? NEED TO LOCATE A JVC SERVICE CENTER? LIKE TO PURCHASE ACCESSORIES? .JVC®IS HERE TO HELP! TOLL FREE: 1(800)252-5722 http://www.jvc.com Remember to retain your Bill of Sale for Warranty Service. - - - Do not attempt to service the product yourself Caution To prevent electrical shock, do not open the cabinet.
-
****************************************************************************** * * it JVC® LIMITED WARRANTY I ONLY FOR PRODUCT PURCHASED IN U.S.A. I 1-1 it I USA ONLY I * JVC Americas Corp. (JVC) warrants this product and all parts thereof, except as set forth below ONLY TO THE * t ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of t * original purchase for the period shown below.