- Multi-Tech Broadband Router User Guide

Chapter 5 – RouteFinder Manager
RouteFinder RF500S User Guide 91
What Is the Purpose of the Routing Table?
In the diagram above, the RF500S-1 has the routing information to route between
192.168.3.x and 192.168.5.x. The device does not have the information about how to
route to the 172.168.2.x network.
If you want the RF500S-1 to route to 172.168.2.x, you must add the following
information to the routing table:
IP:172.168.2.0
Network:255.255.255.0
Gateway IP:192.168.5.254
Interface: Ethernet (Local Network)
If you would like the RF500S-2. to route to 192.168.3.x, enter the following routing
table information into the RF500S Routing settings:
IP: 192.168.3.0
Network:255.255.255.0
Gateway IP: 192.168.5.1
Interface: WAN Ethernet