User Guide

In the below example, Sunday and Monday are linked, so any blocks that are added or removed

for Sunday will automatically and immediately reflect the same for Monday and vice versa:

8. Another way to configure recording schedules is by using setting the time periods. Click

the ‘gear’ icon to the far right of any day to open the Period page:

Here, the periods (Periods 1 - 6) must be in specified in chronological order. You can set either

General, MD, or both with the checkboxes to the right. You can also copy the period settings

over to other days by checking them individually or checking All. Make sure to click OK when

finished.

9. Now that you’ve finished configuring the recording schedules, you may need to copy

these settings over to another channel (or camera). By default, Channel 1 will be selected when

you visit this page. Unless you immediately selected All in the channel window from step 4

above, note that you can copy these settings directly over to another channel by clicking Copy

down below: